Go to top
380 products found

There are the mainstream headphones for your average consumers, and there are the high-fidelity headphones for the audiophiles in all of us. Headphone amplifiers are often required by these high-end and expensive headphones to truly unlock their potential and deliver the best of the best in sound quality to the ears. Read on below to find out about these headphone amplifiers.

Shop now at
TREOO.com
Creative Creative Sound Blaster E5 Portable Headphone Amplifier & USB DAC at 9525.00 PHP from TREOO.com
Creative Creative Sound Blaster E5 Portable Headphone Amplifier & USB DAC
₱ 9,525.00
High Resolution USB DAC and Portable Headphone Amplifier The Sound Blaster E5 is a 24-bit/192kHz high resolution USB DAC and portable headphone amplifier. Built with precision audiophile components, a best-in-class 600 ohm headphone amplifier and aptX technology for Bluetooth, the Sound Blaster E5 is the perfect audio component for music lovers, whether they are on the move or beside their PC/Mac, smart phones, or tablets. Designed for the Audiophile in You The Sound Blaster E5 is designed from the ground up, to reproduce high-fidelity audio with minimum distortion and noise. It is built on the flagship Cirrus Logic Cs4398 Digital-Analogue Converter (Dac), with an impressively high 120dB signal-to-noise ratio (Snr) that supports sample rates of up to 24-bit/192kHz resolution. Sound Blaster E5 is able to decode audio files ranging from MP3s and CDs (16-bit/44kHz) to high-resolution 24-bit/192kHz files, be it from your PC / Mac or other smart devices. Powers High-impedance Headphones, with a Dual Gain Switch A best-in-class Texas Instrument Ti6120A2 headphone amplifier enables you to power any of the headphones available in the market, giving you clarity, details and a total harmonic distortion value plus noise (Thd+N) of Very Low Output Impedance - 2.2 Ohm Headphones, like consumer speakers, have defined classes allowing manufacturers of amplifiers, receivers, etc to design with those standards in mind. Generally different types of headphone fall between 16-32 ohm for consumer or home applications and 600 ohm for broadcast applications. When designing the Sound Blaster E5, our engineers pushed boundaries by specially engineering the headphone amplifier circuit with a very low output impedance of 2.2 ohm. This allows the Sound Blaster E5 to accommodate both extreme ends of headphones in the market while minimizing the introduction of distortion to audio content caused by variance in frequency response. Dual Orientation Recording with CrystalVoice Technology The Sound Blaster E5 records via built-in dual microphones with auto-orientation sensor that reacts to landscape or portrait orientation, allowing stereo recording to smartphones or tablets. The Sound Blaster E5 also features CrystalVoice Technology, a suite of audio recording enhancements built into the digital signal processor (Dsp) that reduces noise and provides for clear calls and voice recordings, be it from mobile phones or via Skype conferencing. Communication profiles such as A2Dp, HFP and Avrcp are supported for voice calls. Hi-Fi Companion for Your Mobile Devices You can play digital audio direct from your iOS or Android* device via the Sound Blaster E5 to your headphones. Digital audio signals are sent from the device directly to the Sound Blaster E5, which decodes them without any degradation in audio quality. What you get is audio playback at its highest fidelity. 7.1 Virtual Surround Support Sound Blaster E5 supports virtual 7.1 channel audio input signals to deliver realistic gaming effects and audio cues with perfect accuracy and positioning via your headphones. Sound Blaster E5 also comes with SBX Pro Studio for immersive audio realism. It can be switched off when listening to high-quality lossless audio, so that you may get to enjoy the songs unprocessed, in the way you desire. Dual Headphone Outputs Dual headphone output lets you and your loved one enjoy your favorite tracks simultaneously! Stream Music Wirelessly via Bluetooth The Sound Blaster E5 features Bluetooth 4.1 with NFC technology for one-touch, fuss-free Bluetooth pairing. A wide range of Bluetooth streaming codecs such as aptX Low Latency, AAC and SBC which enhances audio quality wirelessly, are also supported. Multiple Input Connectivity Options Sound Blaster E5 sports a Cirrus Logic Cs5361 114 dB, 192kHz stereo Analog-to-Digital Converter (Adc) that allows audio recordings of the highest fidelity to your device, be it PC, Mac or even smart devices. In addition, Optical I/O supplements the Line I/O to offer unparalleled connectivity options from and to digital and analog sources, such as today's gaming console, high-definition media player and even modern TVs. Jitter-free Audio Playback The Sound Blaster E5 supports asynchronous mode which is superior to other USB data transfer modes. Data is 'pulled' from the computer under the control of the Sound Blaster E5, not 'pushed' to the Dac. This allows the DAC to process the digital signal at its optimal timing, thereby ensuring the lowest possible output jitter and best possible sound quality with minimal distortion. MFi-certified for Apple iOS The Sound Blaster E5 is a MFi-approved product, designed to work seamlessly with iPod, iPhone, or iPad, and has been certified to meet Apple's performance standards. Long Battery Life The Sound Blaster E5 is equipped with a 3200mAh battery, which offers up to 8 hours* of playback, even when using the Bluetooth connectivity option. Sound Blaster E5 also allows Android users to charge their smart phones while on the go. *Actual battery life will vary with usage scenarios, settings and environmental conditions. Optimize Sound with the SB-Axx1 Multi-Core Audio Processor Incorporated into Sound Blaster E5 is a SB-Axx1 multi-core processor, designed to improve audio experiences, such as increasing the depth and spatial width of the audio you hear, be it in movies or gaming. The SB-Axx1 processor also saves all your audio EQ settings so that you can enjoy your personalized sound, whether the Sound Blaster E5 is connected to a computer, or as a stand-alone headphone amplifier. Backed by Multi-platform Software for iOS and Android Get extensive audio control right in the palm of your hand with the free Sound Blaster Central app for iOS and Android devices. Use it to wirelessly customize all your Sound Blaster audio E5 settings so you hear audio, just the way you want it.
Shop now at
Lazada
Smsl Panda Series Sanskrit PHA + Sanskrit LPS + Sanskrit Pro-B Panda set Audio decoder Headphone Amplifier at 27460.00 PHP from Lazada
Smsl Panda Series Sanskrit PHA + Sanskrit LPS + Sanskrit Pro-B Panda set Audio decoder Headphone Amplifier
₱ 27,460.00
Shop now at
TREOO.com
FiiO FiiO E02i Rocky Portable Smartphone Headphone Amplifier - Black at 1416.00 PHP from TREOO.com
FiiO FiiO E02i Rocky Portable Smartphone Headphone Amplifier - Black
₱ 1,416.00
-
Shop now at
TREOO.com
FiiO FiiO E10K Olympus2 Desktop Headphone Amplifier & USB DAC at 4214.00 PHP from TREOO.com
FiiO FiiO E10K Olympus2 Desktop Headphone Amplifier & USB DAC
₱ 4,214.00
Shop now at
TREOO.com
FiiO FiiO E07K Andes Portable Headphone Amplifier & USB DAC at 4922.00 PHP from TREOO.com
FiiO FiiO E07K Andes Portable Headphone Amplifier & USB DAC
₱ 4,922.00
Andes (E07K) is the updated version of E7.It can bring you to experience the high quality acoustics playback. Lossless music format (96 KHz/24 Bit) contains details that ordinary CD (44.1 KHz/16 Bit) does not embody. On the basis of former E7, Andes (E07K) added some functions which include "right & left channel balance settings”; “bass and treble adjustment”; “line output”; “gain selection" and "hold key" Double using environments--indoors and outdoors make using become very convenient .
Shop now at
JMB Albay Gadgets
FiiO Q1 Portable USB DAC and Headphone Amplifier at 3990.00 PHP from JMB Albay Gadgets
FiiO Q1 Portable USB DAC and Headphone Amplifier
₱ 3,990.00
The FiiO Q1 USB DAC Headphone Amplifier is designed specifically to be used for audio playback from a Computer or Analog sources, the FiiO Q1 supports both a USB input for digital audio and a 3.5mm jack input for analog audio sources, as well as 2 separate 3.5mm Headphones output. The FiiO Q1 supports even 96kHz/24bit High Resolution Lossless Audio formats providing music resolutions better than even ordinary CD quality audio. With dedicated bass and gain selection and Hold Key, The FiiO Q1 is perfect to be used Indoors with a PC or Outdoors with a Mobile devices. High Quality Acoustic Playback at 96kHz / 24bit The Q1 supports lossless music format resolutions of 96kHZ / 24bit, playing details far beyond that of ordinary CDs (44kHz / 16bit). Input sources supporting High Res audio will be required for the desired output. Ports for Multifunctional Usage A simple 3.5mm input allows you to easily amplify any music source. USB charging can be turned on/off via a toggle switch and you can also charge the Q1 via USB while listening to it. Unique Metal Body The FiiO Q1 has a compact & unique design that has a sandblasted exterior for ease of holding. The all metal chassis also allows effective shielding from electro-magnetism. Gain & Bass Switches To amplify music according to different tastes and needs, robust switches have been provided that lead to high quality gain and bass circuits. 1400 mAH Li-Battery for over 30 hours of Playback The FiiO Q1 has a new and improved battery with a playback time of over 30 hours. The device can be charged to full capacity in under 3 hours can be charged while in use as well.
Shop now at
TREOO.com
FiiO FiiO E06 Fujiyama Portable Headphone Amplifier at 1735.00 PHP from TREOO.com
FiiO FiiO E06 Fujiyama Portable Headphone Amplifier
₱ 1,735.00
Shop now at
TREOO.com
Creative Creative SoundBlaster E1 Portable Headphone Amplifier & USB DAC at 2797.00 PHP from TREOO.com
Creative Creative SoundBlaster E1 Portable Headphone Amplifier & USB DAC
₱ 2,797.00
Creative Sound Blaster E1 Portable Headphone Amplifier with Integrated Mic and Dual Headphone Jacks for PC and Smartphones Sound Blaster E1 is a portable and powerful headphone amplifier with support for studio-quality 600 ohm headphones, audio playback, and two headphone jacks for easy music sharing with your friends. Enjoy Studio Quality Audio Tired of having to choose specific headphones impedances to match your setup? The Sound Blaster E1 supports headphones with impedances of up to 600 ohms. This means you can match just about any headphones with it. Enjoy a level of audio detail and resolution previously unreachable. High Fidelity Audio and Clear Voice Conversations Enjoy your music on the go with jaw-dropping audio fidelity of 106dB Signal-to-Noise Ratio (Snr). Hear more music, not noise. The built-in microphone provides the additional benefit of using your normal headphones for conversations over the phone. When connected to PCs and Macs via Usb, you can activate the CrystalVoice technology, a suite of enhancements that reduces noise and provides for clearer conversations. Lighter, Always Better Sound Blaster E1 is small and light at only 25 grams. This means it can be easily carried around in a bag or a pocket, or clipped onto clothing. No longer will you have to haul a headphone amplifier the size of a brick to enjoy better audio. Sound Blaster E1 also performs up to 25 hours per charge. That's more than a whole day of high fidelity continuous playback. Share Your Music the Better Way Sharing your music is easy with the Sound Blaster E1 which comes with two headphone output jacks. Unlike other shared outputs, the Sound Blaster E1 does not compromise on audio fidelity, so the quality remains the same even when powering two discrete outputs. Personalize Your Audio Experience With SBX Pro Studio technology and connected to PCs and Macs, you can further adjust what you love to listen, to your individual taste. Enjoy reduced latency with Audio Stream Input/Output (Asio) support with the Sound Blaster E1. Hear your audio recordings come to life.
Shop now at
Lazada
Yaqin PH-5L 6J1 Vacuum Tube Hi-end Tube headphone amplifier at 10020.00 PHP from Lazada
Yaqin PH-5L 6J1 Vacuum Tube Hi-end Tube headphone amplifier
₱ 10,020.00
Shop now at
Lazada
Xduoo XD-05 32bit/384KHz DSD DAC Portable Audio Headphone Amplifier Black at 10560.00 PHP from Lazada
-7%
Xduoo XD-05 32bit/384KHz DSD DAC Portable Audio Headphone Amplifier Black
₱ 10,560.00 ₱ 11,455.00
Shop now at
Lazada
Xduoo XD-05 32bit/384KHz DSD DAC Portable Audio Headphone Amplifier Silver at 10560.00 PHP from Lazada
-7%
Xduoo XD-05 32bit/384KHz DSD DAC Portable Audio Headphone Amplifier Silver
₱ 10,560.00 ₱ 11,455.00
Shop now at
TREOO.com
FiiO FiiO A1 Portable Headphone Amplifier at 1735.00 PHP from TREOO.com
FiiO FiiO A1 Portable Headphone Amplifier
₱ 1,735.00
Shop now at
TREOO.com
FiiO FiiO E11 Kilimanjaro Portable Headphone Amplifier (Demo Set) at 3152.00 PHP from TREOO.com
FiiO FiiO E11 Kilimanjaro Portable Headphone Amplifier (Demo Set)
₱ 3,152.00
If you are looking for an attractive and powerful portable headphone amplifier, FiiO, manufacturer of no-nonsense headphone amps for a reasonable price, seems to have topped themselves with the announcement the E11 portable amp: this thing looks really good. The E11 portable Headphone Amplifier comes in an aluminum alloy case with a black/silver color scheme. The way the volume knob is protected in the drawings is rather ingenious. The rest of the design reminds us of the Cowon D2. The E11 sports an easily user-replaceable standard cellphone battery, the usual FiiO bass boost, three gain levels, and a standard mini-USB port for charging. The E11 Portable Headphone Amplifier is powered by a 750mAh lithium-ion battery pack that can provide up to 10 hours of operating time and is compatible with Nokia Bl-5B. Demo set has very minor cosmetic scratches on top. Comes with 2 additional batteries and full 1 year warranty.
Shop now at
TREOO.com
 Audioquest DragonFly Black Portable Headphone Amplifier & USB DAC at 5630.00 PHP from TREOO.com
Audioquest DragonFly Black Portable Headphone Amplifier & USB DAC
₱ 5,630.00
The Original DragonFly Launched in 2012, press and public alike have enthusiastically embraced AudioQuest’s multi-award-winning DragonFly USB digital-to-analog converter/preamp/headphone amp as the rare audio product that bridges the gap between die-hard audiophiles and mainstream music lovers. DragonFly plugs into a computer’s USB port to bypass the computer’s compromised audio circuitry and deliver cleaner, clearer, more naturally beautiful sound to headphones, powered speakers, and complete audio systems. Small, affordable, easy to use, and remarkably effective, DragonFly was named Stereophile’s 2012 “Computer Audio Component of the Year” and 2012 “Budget Component of the Year;” Tone Audio’s 2012 “Digital Product of the Year;” Computer Audiophile’s 2012 “Computer Audiophile Product of the Year;” AudioStream’s “Greatest Bits;” and What Hi-Fi?’s 2014 “Product of the Year.” Perhaps most memorably, DigitalAudioReview.net’s John Darko quipped: “A DAC with the DragonFly’s performance at the DragonFly’s price point is as rare as rocking horse sh*t.” We couldn’t have said it better. The Next Generation: DragonFly Black & DragonFly Red While the original DragonFly defined the market for micro-DACs, its USB power draw made it compatible with computers only. Music lovers have craved a more portable version—one that could be reliably used with Apple and Android smartphones and tablets. We’re delighted to present two new options that do just that: DragonFly Black and DragonFly Red. Convenience and performance are no longer mutually exclusive. With DragonFly Black and Red, any computer, laptop, tablet, or smartphone can be used as a true high-fidelity music player, allowing music lovers to enjoy beautiful sound wherever they go, whenever they please. AudioQuest, Gordon Rankin, and Microchip: A Beautiful Partnership AudioQuest and DragonFly designer Gordon Rankin worked alongside Microchip Technology to develop a new high-performance, full-speed USB microcontroller solution that delivers improved signal-to-noise ratio and significantly lower power consumption. Drawing 77% less current than the previous microcontroller, the new Microchip Pic32Mx microcontroller enables true compatibility with Apple and Android smartphones and tablets. Further, we simply cannot overstate the significance of Gordon Rankin’s contributions to AudioQuest. The new DragonFly models embody many of Gordon’s most innovative, creative, and elegant digital-audio solutions to date. Improved 32-Bit Digital Performance For greater overall performance, the new DragonFly models also incorporate improved 32-bit ESS Sabre DAC chips—the 9010 in Black and the higher-performance 9016 in Red—both of which employ minimum-phase filtering for naturally detailed, more authentic sound. While DragonFly Black uses the same high-quality headphone amp and analog volume control found in DragonFly v1.2, DragonFly Red includes the latest ESS headphone amp and a bit-perfect digital volume control that resides on the 9016 DAC chip itself—a sophisticated implementation that ensures maximum fidelity, dynamic contrast, and signal-to-noise ratio. DragonFly Black will output 1.2 volts—enough power to successfully drive all preamplifier input circuits and a wide range of today’s efficient headphones. Meanwhile, with its higher 2.1-volt output, DragonFly Red will be compatible with a wider range of headphones, including power-hungry, low-efficiency models. While the DAC chips we’ve selected are remarkably powerful and sophisticated, we’ve intentionally limited DragonFly Black and DragonFly Red’s processing capabilities to 24-bit/96kHz resolution. This makes using the DragonFlys as simple as it’s always been: they’re fully compatible with PCs without having to download and install new drivers. Most importantly, DragonFly is designed to honor the music you already own and love. Whether you’re listening to Spotify, YouTube, Tidal, ripped CDs, or state-of-the-art high-resolution files, DragonFly will deliver a more emotionally compelling and enjoyable experience. Free Desktop Application for Software Upgradability (for DragonFly Black and Red only) In addition, the new DragonFlys will be software upgradeable through a complimentary Windows or OS X desktop application. As new developments arise in music player applications, streaming protocols, or other associated software, DragonFly users will be able to incorporate those updates to their existing devices. Only the Beginning Introduced to the media at the 2016 Consumer Electronics Show, DragonFly Black and DragonFly Red were named “Stars of Ces” by What Hi-Fi? Magazine. But this is only the beginning. We look forward to building stronger, more meaningful connections between music enthusiasts and the artists, albums, songs, and videos they love. Our hope is that with DragonFly Black, DragonFly Red, and future AudioQuest digital products, more people than ever before can enjoy beautiful music—wherever they go, whenever they please.
Shop now at
Lazada
Musiland MD30 32Bit / 192KHz Stereo DAC + Headphone Amplifier at 33420.00 PHP from Lazada
Musiland MD30 32Bit / 192KHz Stereo DAC + Headphone Amplifier
₱ 33,420.00
Shop now at
TREOO.com
 NuForce Icon iDo Portable Headphone Amplifier & USB DAC - Silver at 13633.00 PHP from TREOO.com
NuForce Icon iDo Portable Headphone Amplifier & USB DAC - Silver
₱ 13,633.00
NuForce Icon iDo is an Audiophile-Grade DAC and Headphone Amp for iPad®; iPhone® and iPod Touch®. iDo extracts audio data in its original digital form (in USB Host mode) from Apple mobile digital devices, delivering bit-perfect, low-jitter, audiophile-quality music file playback. The Icon iDo delivers audiophile-grade CD quality sound to digital music files stored on Apple® mobile digital devices. iDo is ideal for music enthusiasts and musicians alike who primarily listen to—and have their digital music libraries stored on—these devices. Apple products are becoming the hub of a person’s entire music and audio collection, so improving the audio quality produced by these devices is key. The Icon iDo delivers on that at very affordable price point. A fast and easy connection. Using the Icon iDo is simple. Users can connect any Apple mobile device to the Icon iDo with the Apple® approved and included 30-pin sync/charging cable, attach the power supply, and then plug the Icon iDo into a home stereo system using RCA cables or a single coaxial. Users can also plug in headphones directly into the Icon iDo for personal high quality sound playback in a manner the artist intended it to be heard. How iDo makes music stored on Apple devices sound even better? Apple uses its own audio codec, Apple Lossless Encoder (Ale), to compress and store music files on its devices in original CD quality without loss. However, even ALE files only sound as good as the default DAC (digital-to-analog converter) found within the mobile digital device. Icon iDo bypasses the built-in DAC and extracts the audio data stored on the device in its original digital form in USB Host Mode. It then converts the high-quality files for bit-perfect and low-jitter music playback. A portable power station for the ultimate headphone listening experience. Icon iDo also offers a built-in headphone amplifier capable of powering power-hungry headsets, giving users a total audio experience. By properly powering headphones, Icon iDo enhances the auditory performance of the headphones because optimal amperage is being delivered to them, allowing for greater audio clarity. *The maximum sample rate currently supported by Apple is 16-bit/44.1kHz or 24-bit/48kHz. **Icon iDo is designed to work with Apple iTune and iPod software. Other applications may not work (but we have not found any application that is incompatible with iDo).
Shop now at
TREOO.com
 Shozy Px-M1 Portable Headphone Amplifier - Grey at 14129.00 PHP from TREOO.com
Shozy Px-M1 Portable Headphone Amplifier - Grey
₱ 14,129.00
This stylish and sleek portable headphone amp will breathe new life into your audiophile setup while on the go.
Shop now at
TREOO.com
FiiO FiiO E17 Alpen Portable Headphone Amplifier & USB DAC at 7755.00 PHP from TREOO.com
FiiO FiiO E17 Alpen Portable Headphone Amplifier & USB DAC
₱ 7,755.00
Shop now at
TREOO.com
 Teac Ud-501 Desktop Headphone Amplifier & USB Pcm/dsd DAC - Silver at 35375.00 PHP from TREOO.com
Teac Ud-501 Desktop Headphone Amplifier & USB Pcm/dsd DAC - Silver
₱ 35,375.00
TEAC's new Ud-501 is the star of the 501 series. The Ud-501 supports Direct Stream Digital (Dsd) playback at either 2.8 MHz or 5.6MHz (Dxd) rates. PCM audio is supported up to 384kHz/32-bit resolution. It connects to your computer over USB using Asio 2.1 or DoP. The output section of the Ud-501 features two BurrBrown 32-bit DACs per channel and JRC Muses op amps, also with a dual monaural design. Both balanced XLR and unbalanced RCA outputs are available to connect to your power amplifier. A toroidal-core power supply ensures top performance and clean transient playback, for quality that outperforms components five times its price. Advanced Digital Circuits for Hi-resolution Audio Formats DSD 2.8/5.6MHz Native File Playback by Asio 2.1 or DoP Both 2.8MHz and 5.6MHz DSD files are processed in native mode to properly convert DSD into an analog signal, and skipping PCM conversion in between. Asio2.1 and DoP (Dsd over Pcm) playback are also supported. (Mac supports DoP only, with standard driver) Up to 32bit/384kHz PCM File Playback With PCM file format, files from 44.1kHz/16-bit to 384kHz/32bit resolution are supported. Asynchronous Transfer Mode Transfer timing is controlled by more accurately by ignoring the clock signal from a PC, nearly eliminating clock-noise and allowing digital data to travel un-affected. Variety of Digital Filter Settings and Preferences Three types of digital filters are provided for PCM playback, while 4 types of cut-off filters are provided for DSD playback. Also, shutting down unnecessary circuits – USB circuit when S/pdif inout is selected, or Line Out circuit when Headphones are connected – for purer audio processing. Reducing Jitter Noise by 192kHz Up-Converting With a PCM file sampling at a frequency less than 192kHz, users are able to convert up to 192kHz in order to reduce jitter noise, or keep the original sampling rate to enjoy the original sound. Pure Audio Circuits With Classic Audio Pedigree Dual Monaural Circuits to Eliminate Signal Interference and Maximize Performance. Every single part of the digital and analog sections are designed in dual monaural design to eliminate interfering noise to other channels. This maximizes the potential of the the DAC and the operational amplifiers, and achieves a purer audio processing signal. 32bit-compatible BurrBrown Pcm1795 on Each Channel The celebrated BurrBrown Pcm1795 D/A converter is used on each channel, which supports 32bit audio with a 123dB S/N Ratio. D ual Muses8920 Operational Amplifier on Each Channel Two Muses8920 operational amplifiers are used on each channel. The Muses8920 was developed for hi-fi components to deliver clear, 3-dimensional sound. Individual Toroidal-core Power Transformer on Each Channel – Maintaining Total Dual Monaural Design The two toroidal-core power transformers offer a stable current supply with energy-effcient operation. Using a pair of power transformers, one each for the left and right channel, ensures that current is delivered exclusively to each channel. RCA Output with Parallel Buffer for Better Drivability Two operational amplifiers are connected in parallel with the line out circuit section to improve of line-out signal drive. This helps achieve a more linear analog output signal than any other known method. Large Number of Inputs & Outputs for Full-Scale Hi-Fi System Integration The Ud-501 provides two optical and coaxial digital inputs, one pair of XLR and one pair of RCA analog audio outputs. The RCA lineout jacks have an exclusive clearance zone, so a high grade pin cable with a large shell is able to be connected. The output terminal is selectable to either RCA or Xlr. The XLR output connectors have switchable polarity, either pin 2 HOT or pin 3 Hot, to accomodate vintage amplifiers. A standard detachable IEC cable with 3-polar socket allows user to upgrade to high-grade AC cables.
Shop now at
Lazada
Bravo Audio V2 Valve Class A 12AU7 Tube Headphone Amplifier at 2780.00 PHP from Lazada
Bravo Audio V2 Valve Class A 12AU7 Tube Headphone Amplifier
₱ 2,780.00
Shop now at
TREOO.com
 Cayin C6 Portable Headphone Amplifier & USB DAC for Smartphone (EX Demo) at 10234.00 PHP from TREOO.com
Cayin C6 Portable Headphone Amplifier & USB DAC for Smartphone (EX Demo)
₱ 10,234.00
C6 is a portable High-Fidelity DAC + Headphone amplifier unit. Utilizing digital connection enables audio decoding to be carried out by the C6's Wolfson Flagship Wm8741 DAC chip. Enabling high fidelity audio for your portable needs.
Shop now at
TREOO.com
 JDS Labs C5 Portable Headphone Amplifier - Red at 10234.00 PHP from TREOO.com
JDS Labs C5 Portable Headphone Amplifier - Red
₱ 10,234.00
Audibly Perfect Channel Balance Digital stepped attenuation with zero-crossing detection and 1dB attenuation steps provide smooth volume adjustment at all volume levels, even with sensitive IEMs. DC Coupled Signal Path C5 uses a purely resistive signal path. Thin film, 0.1% tolerance resistors ensure low noise and high channel accuracy. Dual LDO Power Regulation High performance audio starts with clean power. Supply rails are filtered by impressive Tps7A4700 and Tps7A3301 regulators to achieve ultra low supply noise at a constant output voltage of+/-7V. Smart USB Charging Powered by a large 1200mAh Li-Ion battery, C5 quickly charges from any USB port (computer, tablet charger, cell phone charger, etc.). A single LED indicates battery status: solid green while on, blinking while battery is low, or blue while charging.
Shop now at
Lazada
Aune X7s Class-A Balance Output Headphone Amplifier (Black) at 13490.00 PHP from Lazada
-10%
Aune X7s Class-A Balance Output Headphone Amplifier (Black)
₱ 13,490.00 ₱ 14,990.00
Shop now at
Lazada
Smsl SD-793II DAC Digital Audio Decoder + Headphone Amplifier Silver at 2980.00 PHP from Lazada
Smsl SD-793II DAC Digital Audio Decoder + Headphone Amplifier Silver
₱ 2,980.00
Shop now at
TREOO.com
 Alpha Design Labs Stride Portable Headphone Amplifier - Black at 18590.00 PHP from TREOO.com
Alpha Design Labs Stride Portable Headphone Amplifier - Black
₱ 18,590.00
It’s the age of personal, portable electronics; everyone carries their music with them. Whether you’re using iTunes for low-bit-rate downloads or high resolution music files just connect your computer to the Stride with one of our matching ADL Formula 2 USB cables or the new i-D35SP analog stereo cables. When you’re on the road plug your music player’s analog headphone output into the line input of the Stride and open the player’s volume to maximum and use the volume control on the Stride. For higher resolution all-digital signals simply connect the Stride to your computer’s USB port. The USB port charges the battery and you can listen to music while it’s charging!
Shop now at
TREOO.com
FiiO FiiO E01 Alisan Portable Headphone Amplifier for iPhone/iPod - Black at 1133.00 PHP from TREOO.com
FiiO FiiO E01 Alisan Portable Headphone Amplifier for iPhone/iPod - Black
₱ 1,133.00
The FiiO E01 Alisan (FiiO E1) Headphone Amplifier for iPod/iPhone with In-Line Remote Control is a headphone amplifier specifically designed for use with Apple's iPod and iPhone. It is the first headphone amplifier in the world with in-line remote control functions. The FiiO E01 has a built-in high quality headphone amplifier IC manufactured by Texas Instruments. The FiiO E01 uses the line out signal from the iPod/iPhone, so it provides better sound quality, and is able to drive high impedance or low sensitivity headphones! With the in-line control function, you can easily control the playback of the iPod/iPhone from the E01 Amplifier. Powered by the iPod or iPhone, the FiiO E01 requires no charging or batteries. The FiiO E01 will bring you better sound quality and a more convenient playback experience!
Shop now at
Takatack
FiiO Q1 Portable USB DAC and Headphone Amplifier at 3990.00 PHP from Takatack
FiiO Q1 Portable USB DAC and Headphone Amplifier
₱ 3,990.00
Shop now at
TREOO.com
 Questyle Audio CMA800i Desktop Headphone Amplifier & USB DAC at 134558.00 PHP from TREOO.com
Questyle Audio CMA800i Desktop Headphone Amplifier & USB DAC
₱ 134,558.00
Excellent Headphone Amp Section The Questyle Audio CMA800i headphone amplifier section follows Questyle’s patented "Current Mode Amplification" design used in their flagship headphone amplifier, the Questyle Audio Cma800R, in fact , most of the components used are the same. The ultra low 0.00026% distortion, ultra wide bandwidth, up to 850kHz (+0, -3dB), and Super-current pure Class A architecture enables the Questyle Audio CMA800i’s amplification to be unparalleled among all-in-one DAC/amplifier models. A World Class DAC section Unlike other DACs that claim DSD support, yet in actuality provide DoP (Dsd over Pcm), the Questyle Audio CMA800i accepts the DSD bit-stream directly from your computer, bypassing your computer’s audio processing and digital volume control as well as the Questyle Audio CMA800i’s digital filters, to provide True Dsd, the way it was meant to be heard, without requiring expensive difficult to install proprietary connectors, or as is the case with DoP breaking up the bit-stream into 16bit packets and compressing them into a PCM data-stream and then uncompressing them at the other end, buffering them, then reassembling the bit-stream so that it may be sent to the DAC as Dsd, all of which requires an extreme amount of processing at both the computer end and the DAC end to perform in real time (which invariably leads to latency, data loss, etc), not to mention a 33% increase in bandwidth requirements for the USB ports and cabling. IIR Digital Filter Currently the majority of DACs use FIR (finite impulse response) digital filters, but research and testing has shown that our ears are very sensitive to the pre-ring that FIR digital filters add to the impulse wave, making the music sound incoherent and unnatural. The Questyle Audio CMA800i offers the more advanced IIR digital filter, which completely eliminates the pre-ring from the impulse wave producing a more natural sound. Seperate Pre-Amplifier Section The Pre-Amplifier output is another unique feature of the Questyle Audio CMA800i. Many manufacturers, when designing an all-in-one model, use the headphone amplifier circuit loop to support the pre-amplifier output to reduce costs. To achieve the best possible sound performance, the Questyle Audio CMA800i is designed with a totally independent pre-amplifier, even the power supply supporting the pre-amplifier circuit is independently located. In keeping with Questyle Audio’s no-compromise approach. and to make usage more convenient, an analog volume control circuit is employed, using an Alps27 motor controlled potentiometer for operation via remote control. Hi-End Components Throughout Superior sound performance requires the use of Hi-end components. Questyle uses only the very best in the Questyle Audio CMA800i, each component undergoing an extensive testing and selection process, with many being custom made and purpose built. 10mm Thick Aluminum Cover and Bottom Chassis The Questyle Audio CMA800i aluminum chassis is produced by Foxconn using precise CNC tooling machines. The upper cover and bottom chassis “mutual bit” structure design, provides the Questyle Audio CMA800i with stable heat, excellent control of sympathetic vibration and excellent shielding from Rfi/emi radiation. Quality Control Each product is burned in for 72 hours before shipping and every product has its own serial number and test report. The engineers prepare two copies of the test report, one report is put in the box for the customer and another report is kept in a safety deposit box at Questyle. If there are any questions, about any product, at anytime, Questyle is able to find the report, for that unit, to aid in solving any issues. For distributors, Questyle can provide a professional technical guide.
Shop now at
TREOO.com
 NuForce Icon uDAC-2SE Portable Headphone Amplifier & USB DAC - Special Edition Black at 12748.00 PHP from TREOO.com
NuForce Icon uDAC-2SE Portable Headphone Amplifier & USB DAC - Special Edition Black
₱ 12,748.00
Advanced NuForce technology delivers highest-resolution audio for superior sound. If you own a laptop and love music, you need a NuForce uDAC-2SE. If you're a gamer, uDAC-2SE brings realistic sound effects that put you in the game. The NuForce uDAC-2SE is a high-performance, 24bit/96kHz USB Digital Audio Converter (Dac) that connects your personal computer's audio to your home stereo, desktop sound system, or headphones to deliver superior sound. It improves upon our original uDAC model by providing a highly linear Tocos volume control for improved channel tracking at low listening levels, a 24bit/96kHz USB Dac, and an improved headphone amp. Powerful sound in a small, affordable package. Don't let its diminutive size fool you: the uDAC family packs a proverbial punch when it comes to improving the sound you get from your computer, meeting or exceeding the performance of audiophile-grade CD players. uDAC is also flexible: its outputs include analog Rca, digital coaxial, and high-performance headphone outputs to accommodate most computers and self-powering headphones. Why the little uDAC can make such a big difference. The DAC (Digital Audio Converter) in most laptops are typically not designed to deliver best-quality sound. This can result in subtle errors in the rebuilding process, diminishing audio quality. Advanced NuForce DACs create a warmer, more detailed approximation of the source file. Audio sounds richer and fuller, with more clarity on the high and and more depth and power in the mids and lows. You'll hear details in your favorite music you never heard before. Your favorite headphones and speakers reproduce sound to their full potential. About Asynchronous USB Audio The uDAC-2SE (Special Edition) and uDAC-2SGE (Signature Gold Edition) are designed for Asynchronous USB Audio mode. The difference between synchronous and asynchronous USB audio is detectable by most, but best left for the individual audio enthusiast and audiophile to decide. That's why if you're new to appreciating high-quality USB audio, we recommend that you start with our baseline uDAC-2 model without Asynchronous USB Audio to avoid the more involved setup required for AA. If you ever decide to upgrade to a uDAC-2SE, we provide the option to purchase a kit (Sgd $189) that includes a replacement circuit board and stainless steel front and back panels* *For more information, please refer to the Async USB Audio FAQ and Setup Guide. No matter what uDAC you choose to start with, you can expect to hear detail, warmth and clarity from your computer's digital audio files you've never heard before. On listening at low volumes: If you're using the uDAC-2 with sensitive in-ear earphones and listening at low volume, please read this article about channel imbalance issues . Notes For Recording Engineer: The uDAC-2 is designed for consumer playback of digital music and has not been calibrated for professional recording. At the 9 o'clock volume indicator, there is hardly any signal; further, analog pots do not behave reliably. At normal listening levels, the volume tracking is within 1dB. The uDAC-2 volume maxes out at around 0dB input (maximum digital input). Thd+N around 1% is intentional to target the voltage rail limit in order to achieve the loudest possible, but distortionless, music playback. Short of 1% THD at 0dB input, the Dac2 is not at its voltage limit, which results in diminished volume for music.
Shop now at
TREOO.com
 NuForce Icon uDAC-2SE Portable Headphone Amplifier & USB DAC - Special Edition Red at 12748.00 PHP from TREOO.com
NuForce Icon uDAC-2SE Portable Headphone Amplifier & USB DAC - Special Edition Red
₱ 12,748.00
Advanced NuForce technology delivers highest-resolution audio for superior sound. If you own a laptop and love music, you need a NuForce uDAC-2SE. If you're a gamer, uDAC-2SE brings realistic sound effects that put you in the game. The NuForce uDAC-2SE is a high-performance, 24bit/96kHz USB Digital Audio Converter (Dac) that connects your personal computer's audio to your home stereo, desktop sound system, or headphones to deliver superior sound. It improves upon our original uDAC model by providing a highly linear Tocos volume control for improved channel tracking at low listening levels, a 24bit/96kHz USB Dac, and an improved headphone amp. Powerful sound in a small, affordable package. Don't let its diminutive size fool you: the uDAC family packs a proverbial punch when it comes to improving the sound you get from your computer, meeting or exceeding the performance of audiophile-grade CD players. uDAC is also flexible: its outputs include analog Rca, digital coaxial, and high-performance headphone outputs to accommodate most computers and self-powering headphones. Why the little uDAC can make such a big difference. The DAC (Digital Audio Converter) in most laptops are typically not designed to deliver best-quality sound. This can result in subtle errors in the rebuilding process, diminishing audio quality. Advanced NuForce DACs create a warmer, more detailed approximation of the source file. Audio sounds richer and fuller, with more clarity on the high and and more depth and power in the mids and lows. You'll hear details in your favorite music you never heard before. Your favorite headphones and speakers reproduce sound to their full potential. About Asynchronous USB Audio The uDAC-2SE (Special Edition) and uDAC-2SGE (Signature Gold Edition) are designed for Asynchronous USB Audio mode. The difference between synchronous and asynchronous USB audio is detectable by most, but best left for the individual audio enthusiast and audiophile to decide. That's why if you're new to appreciating high-quality USB audio, we recommend that you start with our baseline uDAC-2 model without Asynchronous USB Audio to avoid the more involved setup required for AA. If you ever decide to upgrade to a uDAC-2SE, we provide the option to purchase a kit (Sgd $189) that includes a replacement circuit board and stainless steel front and back panels* *For more information, please refer to the Async USB Audio FAQ and Setup Guide. No matter what uDAC you choose to start with, you can expect to hear detail, warmth and clarity from your computer's digital audio files you've never heard before. On listening at low volumes: If you're using the uDAC-2 with sensitive in-ear earphones and listening at low volume, please read this article about channel imbalance issues . Notes For Recording Engineer: The uDAC-2 is designed for consumer playback of digital music and has not been calibrated for professional recording. At the 9 o'clock volume indicator, there is hardly any signal; further, analog pots do not behave reliably. At normal listening levels, the volume tracking is within 1dB. The uDAC-2 volume maxes out at around 0dB input (maximum digital input). Thd+N around 1% is intentional to target the voltage rail limit in order to achieve the loudest possible, but distortionless, music playback. Short of 1% THD at 0dB input, the Dac2 is not at its voltage limit, which results in diminished volume for music.
Shop now at
JMB Albay Gadgets
FiiO E18 USB/Android DAC Headphone Amplifier at 7990.00 PHP from JMB Albay Gadgets
FiiO E18 USB/Android DAC Headphone Amplifier
₱ 7,990.00
The Ideal Partner for Android Phones Music Sounds Better than Ever: You love the convenience of listening to music with smartphones USB DAC & Amp Tailored For Smartphones: E18 can work with smartphones with USB OTG function. Connected via Micro USB OTG cable, The E18 would first decode the music stream, then amplify it. The E18 can even remotely control the playback of songs on the phone Mobile Power Supply: The E18 can also serve as a mobile power supply to charge the phone, so you are totally free of worries of running out of battery when listening from your phone. USB DAC & AMP for Computer (96khz/24bit): The E18 can also serve as a great USB DAC & AMP for computers. Connect the E18 to your computer, grab your headphones and enjoy the music Portable Headphone Amplifier: The E18 also has a line in port to connect to other players, Serving as a dedicated headphone amplifier in this configuration Built-in battery: 3500mAh Li-polymer When used as power source, the automatic cut-off and self-recovery function of charging current limiter IC on the E18 protects the phone. Battery life: 25 hours (AMP only) / 12 hours (USB DAC+AMP) All-new headphone amp tuning and longer run-time: the E18 can function as outboard headphone amp for mobile music enjoyment with any source, including all Androids, iDevices and DAPs. Output Power: >300mW@32Ω USB audio sampling rates supported: 32/44.1/48/96KHz@16/24Bit THD: <0.005%@1KHz/32Ω SNR: >106dB(A Weight) Frequency Response: 20Hz~20KHz(+/-0.2dB) Headphone impedance(Recommended): 16Ω~150Ω
Shop now at
TREOO.com
 Beyerdynamic A20 Desktop Headphone Amplifier at 31834.00 PHP from TREOO.com
Beyerdynamic A20 Desktop Headphone Amplifier
₱ 31,834.00
Rediscover Your Music With the A20 you will rediscover your dynamic headphones. This new headphone amplifier from beyerdynamic is perfect for all headphone applications and provides dual outputs for shared listening with a partner. The A20 headphone amplifier is used to operate up to two headphones with a nominal impedance from 30 to 600 ohms. The power amplifier, of a discrete design, and the combination of selected high-grade components inside the device allows even high-impedance hi-fi headphones to be driven flawlessly over the entire frequency range. Superior Sound The circuit of the A20 is designed based on beyerdynamic's legendary A1 reference headphone amplifier. The discrete output stage provides plenty of power even for high-impedance headphones while the dynamic, open and precise sound sets the A20 apart from what can be found in the normal output stages of regular amplifiers or receivers. This is confirmed by its first-class circuitry and excellent technical specifications that provide a balanced sound for long periods of comfortable listening. High Build Quality and Nice Looks Made of brushed aluminum, the housing of the A20 is especially solid and resonance-free. Due to the innovative chassis design, no screws are visible on the external surfaces. Equipped with an original Alps potentiometer for variable volume control, a knob turned from solid aluminum completes the attractive yet robust look of this amplifier. The volume control adjusts the volume for both headphone outputs, which are connected in parallel. Its handy button is made of solid aluminum and hides a high-grade Alps potentiometer with smooth volume values. Gold-plated RCA phono sockets on the rear are used to connect the audio source and allow a signal transmission without loss. The input is looped-through, which means audio signals that are present at the Input sockets are routed to the Output sockets, even when the device is switched off. Due to the hard-wired design there is no loss. The high-quality metal housing is made of brushed aluminum and protects against signal scattering and vibration. Simple and Flexible With a high-gain RCA input, the A20 works easily with most sources. The input signal can be looped through and is entirely free from signal-loss thanks to the hard-wired RCA output. Due to the built-in power supply, which is connected via a detachable power cord (supplied), no external power supply is needed avoiding disturbing background noise. Thanks to the dual headphone jacks on the front, two people can listen to the A20 together without an adapter cable.
Shop now at
TREOO.com
 NuForce Icon uDAC-2 Portable Headphone Amplifier & USB DAC - Silver at 5630.00 PHP from TREOO.com
NuForce Icon uDAC-2 Portable Headphone Amplifier & USB DAC - Silver
₱ 5,630.00
Advanced NuForce technology delivers highest-resolution audio for superior sound. If you own a laptop and love music, you need a NuForce uDAC-2. If you're a gamer, uDAC-2 brings realistic sound effects that put you in the game. The NuForce uDAC-2 is a high-performance, 24bit/96kHz USB Digital Audio Converter (Dac) that connects your personal computer's audio to your home stereo, desktop sound system, or headphones to deliver superior sound. It improves upon our original uDAC model by providing a highly linear Tocos volume control for improved channel tracking at low listening levels, a 24bit/96kHz USB Dac, and an improved headphone amp. Powerful sound in a small, affordable package. Don't let its diminutive size fool you: the uDAC family packs a proverbial punch when it comes to improving the sound you get from your computer, meeting or exceeding the performance of audiophile-grade CD players. uDAC is also flexible: its outputs include analog Rca, digital coaxial, and high-performance headphone outputs to accommodate most computers and self-powering headphones. Why the little uDAC can make such a big difference. The DAC (Digital Audio Converter) in most laptops are typically not designed to deliver best-quality sound. This can result in subtle errors in the rebuilding process, diminishing audio quality. Advanced NuForce DACs create a warmer, more detailed approximation of the source file. Audio sounds richer and fuller, with more clarity on the high and and more depth and power in the mids and lows. You'll hear details in your favorite music you never heard before. Your favorite headphones and speakers reproduce sound to their full potential. About Asynchronous USB Audio Only the uDAC-2SE (Special Edition) and uDAC-2SGE (Signature Gold Edition) are designed for Asynchronous USB Audio mode. The difference between synchronous and asynchronous USB audio is detectable by most, but best left for the individual audio enthusiast and audiophile to decide. That's why if you're new to appreciating high-quality USB audio, we recommend that you start with our baseline uDAC-2 model without Asynchronous USB Audio to avoid the more involved setup required for AA. If you ever decide to upgrade to a uDAC-2SE, we provide the option to purchase a kit (Sgd $189) that includes a replacement circuit board and stainless steel front and back panels* *For more information, please refer to the Async USB Audio FAQ and Setup Guide. No matter what uDAC you choose to start with, you can expect to hear detail, warmth and clarity from your computer's digital audio files you've never heard before. On listening at low volumes: If you're using the uDAC-2 with sensitive in-ear earphones and listening at low volume, please read this article about channel imbalance issues . Notes For Recording Engineer: The uDAC-2 is designed for consumer playback of digital music and has not been calibrated for professional recording. At the 9 o'clock volume indicator, there is hardly any signal; further, analog pots do not behave reliably. At normal listening levels, the volume tracking is within 1dB. The uDAC-2 volume maxes out at around 0dB input (maximum digital input). Thd+N around 1% is intentional to target the voltage rail limit in order to achieve the loudest possible, but distortionless, music playback. Short of 1% THD at 0dB input, the Dac2 is not at its voltage limit, which results in diminished volume for music.
Shop now at
TREOO.com
 Alpha Design Labs Cruise Portable Headphone Amplifier at 24610.00 PHP from TREOO.com
Alpha Design Labs Cruise Portable Headphone Amplifier
₱ 24,610.00
It's the age of personal, portable electronics; everyone carries their music with them. Accessories reflect your personal style and the Cruise is sure to create jealousy and envy wherever you go. It delivers thrilling sound to match its gorgeous appearance. Whether you're using iTunes for low-bit-rate downloads or high resolution music files just connect your computer to the Cruise with one of our matching ADL Formula 2 USB cables or the new i-D35SP analog stereo cables. When you're on the road plug your music player's analog headphone output into the line input of the Cruise and open the player's volume to maximum and use the volume control on the Cruise. For higher resolution all-digital signals simply connect the Cruise to your computer's USB port. The USB port charges the battery and you can listen to music while it's charging!
Shop now at
TREOO.com
 Heir Audio Rendition 1 Portable Headphone Amplifier - Silver at 17670.00 PHP from TREOO.com
Heir Audio Rendition 1 Portable Headphone Amplifier - Silver
₱ 17,670.00
Heir Audio is very pleased to launch our first portable amplifier, Rendition 1, worldwide. After a full year research and development, our engineers have designed a unique personal amplifier with excellent sound quality supported by a long lasting battery. Just like our any other products, Rendition 1 carries the Heir Audio signature of exquisite design concept with the delicate black carbon fiber on the both sides. Rendition 1 has further expanded our product line and once again reinforced our belief that each one of our products is a unique acoustical and artistic expression of the beauty of music! The successful preorders have approved the acceptance of this wonderful amplifier! The Rendition 1 is an exciting portable amp, that in keeping with Heir Audio tradition, sounds as good as it looks, and looks as good as it sounds. The sound quality can be described as “black” (quite) or without back ground hiss. The concept behind the amp was to add more “depth” and “control” to the music, rather than adding colouration. If bass is present in the music, the amp is there, waiting to add more depth; if there are highs in the music, the amp delivers those as well cleanly and clearly. The Rendition 1 is available in two case colours, black or silver, accented with black carbon fiber, rendering a look of unsurpassed class.
Shop now at
TREOO.com
 Teac Ha-501 Desktop Headphone Amplifier - Black at 35375.00 PHP from TREOO.com
Teac Ha-501 Desktop Headphone Amplifier - Black
₱ 35,375.00
Introduce yourself to TEAC’s Ha-501, a fully analog, dual monaural headphone amplifier with elegance. Part of the 501 series, this Class-A amplifier delivers superior sound quality, a sleek, modern look, all encased in a rugged but compact design. The Ha-501 supplies regular headphone listeners with quality sound, features and adaptable options that cannot be found in regular amplifiers. Pair it with your favorite headphones the same way you would a normal amp with favored speakers and take advantage of DC Servo Technology, Switchable damping Factors, High Output Power, a large Toroidal-Core Power Transformer and relax to your favorite music or radio broadcast. A headphone amplifier to achieve peak headphone performance In general, a headphone output from conventional hi-fi components does not allow even high-quality headphones to perform at their peak potential. The same way one chooses an amplifier to match with your favorite speakers, it is very impotant to chosse an appropriate headphone amplifier that matches your favorite headphones. A headphone amplifier is a "must-have" listening device for audiophiles. Active DC Servo Technology for decreased distortion, and discrete Class-A Amplifier In order to develop a first-class low distotion Class-A headphone amplifier, Teac held a series of sound evalutions during the development. These tests led to the careful choosing of parts and descrete circuit design. In addition, like most full-size hi-fi components, in order to eliminate Offset Electrical Potential, Active DC Servo Technology is utilized. Dual Monaural Design that eliminates interference between Left and Right channels In regards to the circuit design, each channel is completely designed on an individual basis to avoid signal interface to/from another. This contribution eliminates cross-talk, crucial headphone listening. Muses8920 Op-Amps - for high-end quality Muses8920 Op-Amp chip-sets are designed for high-end audio. Employed individually on the Left and Right channels, they help achieve superior sound. This Op-amp performs superb IV-conversion and is already very well regarded and used in a wide-range of hi-fi components. Large Toroidal-core Power Transformer An over-sized Toroidal-core power transformer is also employed to supply stable current to the every part of the circuit. Damping Factor Selector to optimize headphones' characteristic Each pair of headphones has its Damping Factor, a resisting force against non-intentional movement of the diaphram moving air forwards and backwords as sound. The value of the Damping Factor varies model by model, as diaphrams are made by different materials, in different shapes or different construction designs. Since headphones' diaphrams are activated by a very small current compared to conventional speakers, the damping factor increases, the sound is lean and crisp, and has a close relationship with headphones' impedance. Therefore, selecting the right Damping Factor is crucial in order for your headphones to perform at their peak potential. The Ha-501 provides 5 selectable Damping Factors, so users have the best suited signal for multiple headphones. Total 2,800mA of output power drives your high impedance headphones The Ha-501 schieves a remarkable 1,400mW output power per channel at 32 ohms impedance. The divice delivers not only enough power to drive standard headphones with an impedance range from 80 to 250 ohms, but also high-class 600 ohms hi-fi headphones. Robust Aluminum Body with a Classy Appearance Re-defining high class hi-fi components, the Ha-501 has a small footprint, classy appearance and is constructed with aluminum panels to create an authentic but modern looking hi-fi component. A robust metal construction helps eliminate vibrations that may affect the sound quality. The bottom and sidewalls are formed with a steel chassis, aluminum for the front panel and the rear panel out of steel. In order to ensure it's rugged design, each panel is connected with a beam that runs through the center of the unit. Normally, this type of construction is only for full-size components, particularly CD players that generate inherent motor vibrations. This construction ensures the Ha-501 is an authentic hi-fi component that will last you for many years. Choose between a handsome black version and a brilliant silver version to match with any interior or design. Well-designed User Interface Another remarkable feature of the Ha-501 is the user-friendly design. The firm-torqued volume control allows users to adjust the volume level with ease and precision while the toggle-type power switch assures On/off operation at a glance. Auto-muting function protects your ears from unexpected loud sounds when switching between headphones with different levels of impedance. Professional grade Input/Output connectors On the rear panel, a pair of Neutrik brand XLR input connectors allow users to connect high-end components or professional audio equipment, while wider-pitch RCA pin jacks allow user to connect large-shaft RCA pin cables from other markets. A detachale type 3-polar power inlet socket is also avalable. On the front, a 3.5mm stereo mini-jack allows users to connect a portable music player such as an iPod, conveniently. Switchable Output Mode for flexibility Line output level from the rear panel can be swiched amongst "Fixed Level", "Variable Level (coupled with volume)" and "Off".
Shop now at
TREOO.com
 Audio-Technica Ath-Ha21 Desktop Headphone Amplifier at 7011.00 PHP from TREOO.com
Audio-Technica Ath-Ha21 Desktop Headphone Amplifier
₱ 7,011.00
Latest low cost desktop amplifier from audio technica, capable of 300mW output with a low harmonic distortion of 0.0008%, the Ath-Ha21 is a cost effective solution for your home amplifier needs.
Shop now at
Lazada
Little Dot MKV MK5 Solid State Mosfet Headphone Amplifier at 16390.00 PHP from Lazada
Little Dot MKV MK5 Solid State Mosfet Headphone Amplifier
₱ 16,390.00
Shop now at
TREOO.com
 Cayin HA-2i Desktop Headphone Amplifier at 9171.00 PHP from TREOO.com
Cayin HA-2i Desktop Headphone Amplifier
₱ 9,171.00
Improved upon the Ha-2, the HA-2i features a much smaller footprint but even better performance than before. Driving high impedence headphones with ease, the HA-2i is crafted to pair beautifully with popular cans like the Hd600, Hd650, K701, even orthodynamic headphones wouldn't be an issue as well.
Shop now at
TREOO.com
 Lehmann Audio Rhinelander Desktop Headphone Amplifier - Black at 21246.00 PHP from TREOO.com
Lehmann Audio Rhinelander Desktop Headphone Amplifier - Black
₱ 21,246.00
Despite all the down-to-earthness of an entry-level model – this ambitious headphone amplifier will open up a whole new world of musical enjoyment to you. The Rhinelander stands fully in the high-end tradition of the Lehmannaudio products. With its superior set of features it shows a marked contrast to other devices in its price class. If you have taken a sceptical stance towards headphones so far, the Rhinelander will fully convince you of the contrary. From now on using headphones will never again be a compromise aiming to keep domestic peace, but a pleasant way to fully indulge in your passion for music. Ultra low-noise, transparent and with an impressive performance potential … an addictive sound experience is awaiting you. "Perhaps, more than with any affordable headphone amp we can recall, the sound just keeps you there listening after bedtime and you’ll find yourself enjoying familiar recordings as never before." — Hi-Fi Choice Your first step into the world of headphone amps The sonic kinship with the Linear reference device is due to the specially selected, high-grade components and sophisticated circuit design. The Rhinelander has a well dimensioned, discrete class A solid-state output stage with no overall negative feedback, which holds sufficient power reserves available for most common headphones and also gives your favourite sounds an impressive clarity. An impressive all-rounder Moreover, our entry-level model is equipped with plenty of other audiophile components: for instance, we have chosen low-loss MKP capacitors for the audio path and a double-sided pc board for an optimum layout. Low ESR electrolytic capacitors in the power supply, an integrated voltage gain stage and a Neutrik headphone socket serve to optimise the audiophile device. The volume controls are handpicked to ensure a high synchronism and to keep localisation as stable as on the recording. In addition the Rhinelander features two inputs plus an input selection via a high-quality relay. By the way, it also knows how to delight as a high-class single-source preamplifier. The single-source preamp mode is active as default setting. Such an elaborate construction with exquisite components is unique in a headphone amplifier of this price range.
Shop now at
Lazada
Gustard H10 High-Current Discrete Class A HiFi Stereo Headphone Amplifier at 17990.00 PHP from Lazada
Gustard H10 High-Current Discrete Class A HiFi Stereo Headphone Amplifier
₱ 17,990.00
Shop now at
Lazada
Yulong Crystal Mini Portable Headphone Amplifier at 10299.00 PHP from Lazada
Yulong Crystal Mini Portable Headphone Amplifier
₱ 10,399.00
Shop now at
Lazada
Musiland HP11 Headphone Amplifier at 16430.00 PHP from Lazada
Musiland HP11 Headphone Amplifier
₱ 16,430.00
Shop now at
GearBest
Gearbest Xduoo XD - 05 Portable Audio DAC Headphone Amplifier at 10546.00 PHP from GearBest
Gearbest Xduoo XD - 05 Portable Audio DAC Headphone Amplifier
₱ 10,546.00
Xduoo XD - 05 Portable Audio DAC Headphone Amplifier
Shop now at
TREOO.com
 iRiver Astell&Kern Ak380 Copper Amp Docking Portable Headphone Amplifier at 49539.00 PHP from TREOO.com
iRiver Astell&Kern Ak380 Copper Amp Docking Portable Headphone Amplifier
₱ 49,539.00
A New Approach to Music, Ak380 AMP Copper Astell&Kern aims to match Ak380 Copper and deliver the acoustic characteristics of raw material, copper through AMP as well. Characteristics of raw material, Copper "Sound with a sense of depth" "Sound with a sense of weight" "Sound with a greater balance" Advantages of Ak380 AMP "Expandable AMP with a harmonious combination of raw material and design" "high Gain output of 8.1 Vrms" A combination of Ak380 Copper and AMP Copper extends the characteristics of raw material, copper to the player and AMP as well to deliver better sound quality than the old Ak380 duralumin and AMP aluminium combination.
Shop now at
Lazada
Bravo Audio Headplug Mini Rechargeable Guitar Headphone Amplifier at 1380.00 PHP from Lazada
Bravo Audio Headplug Mini Rechargeable Guitar Headphone Amplifier
₱ 1,380.00
Shop now at
Takatack
FiiO A3 Portable Headphone Amplifier (Silver) at 2995.00 PHP from Takatack
FiiO A3 Portable Headphone Amplifier (Silver)
₱ 2,995.00
Shop now at
TREOO.com
 NuForce Icon uDAC-2 Portable Headphone Amplifier & USB DAC - Black at 5630.00 PHP from TREOO.com
NuForce Icon uDAC-2 Portable Headphone Amplifier & USB DAC - Black
₱ 5,630.00
Advanced NuForce technology delivers highest-resolution audio for superior sound. If you own a laptop and love music, you need a NuForce uDAC-2. If you're a gamer, uDAC-2 brings realistic sound effects that put you in the game. The NuForce uDAC-2 is a high-performance, 24bit/96kHz USB Digital Audio Converter (Dac) that connects your personal computer's audio to your home stereo, desktop sound system, or headphones to deliver superior sound. It improves upon our original uDAC model by providing a highly linear Tocos volume control for improved channel tracking at low listening levels, a 24bit/96kHz USB Dac, and an improved headphone amp. Powerful sound in a small, affordable package. Don't let its diminutive size fool you: the uDAC family packs a proverbial punch when it comes to improving the sound you get from your computer, meeting or exceeding the performance of audiophile-grade CD players. uDAC is also flexible: its outputs include analog Rca, digital coaxial, and high-performance headphone outputs to accommodate most computers and self-powering headphones. Why the little uDAC can make such a big difference. The DAC (Digital Audio Converter) in most laptops are typically not designed to deliver best-quality sound. This can result in subtle errors in the rebuilding process, diminishing audio quality. Advanced NuForce DACs create a warmer, more detailed approximation of the source file. Audio sounds richer and fuller, with more clarity on the high and and more depth and power in the mids and lows. You'll hear details in your favorite music you never heard before. Your favorite headphones and speakers reproduce sound to their full potential. About Asynchronous USB Audio Only the uDAC-2SE (Special Edition) and uDAC-2SGE (Signature Gold Edition) are designed for Asynchronous USB Audio mode. The difference between synchronous and asynchronous USB audio is detectable by most, but best left for the individual audio enthusiast and audiophile to decide. That's why if you're new to appreciating high-quality USB audio, we recommend that you start with our baseline uDAC-2 model without Asynchronous USB Audio to avoid the more involved setup required for AA. If you ever decide to upgrade to a uDAC-2SE, we provide the option to purchase a kit (Sgd $189) that includes a replacement circuit board and stainless steel front and back panels* *For more information, please refer to the Async USB Audio FAQ and Setup Guide. No matter what uDAC you choose to start with, you can expect to hear detail, warmth and clarity from your computer's digital audio files you've never heard before. On listening at low volumes: If you're using the uDAC-2 with sensitive in-ear earphones and listening at low volume, please read this article about channel imbalance issues . Notes For Recording Engineer: The uDAC-2 is designed for consumer playback of digital music and has not been calibrated for professional recording. At the 9 o'clock volume indicator, there is hardly any signal; further, analog pots do not behave reliably. At normal listening levels, the volume tracking is within 1dB. The uDAC-2 volume maxes out at around 0dB input (maximum digital input). Thd+N around 1% is intentional to target the voltage rail limit in order to achieve the loudest possible, but distortionless, music playback. Short of 1% THD at 0dB input, the Dac2 is not at its voltage limit, which results in diminished volume for music.
Shop now at
TREOO.com
 Meridian Prime Desktop Headphone Amplifier at 77867.00 PHP from TREOO.com
Meridian Prime Desktop Headphone Amplifier
₱ 77,867.00
Overview Recently, the headphone market has greatly increased in popularity, and for many it is the primary way to experience music. This choice is based not only on performance, but also feel, comfort, and style. It is with this in mind we introduce Meridian Prime Headphone Amplifier. With a new chassis design instantly identifiable as Meridian Dna, Meridian Prime delivers lifelike performance from any headphone and is designed to appeal to audio enthusiasts who seek the highest possible performance from conventional analogue audio sources. Meridian Prime provides three inputs, one dedicated and optimised to USB sources for computer audio, discrete pure analogue inputs on RCA for traditional sources, and a 3.5mm connection for portable devices such as a smart phone or tablet. Asp, or Analogue Spatial Processing, is an option for “outside the head” listening through headphones. Design Despite its diminutive size, Meridian Prime echoes the design elements of any other Meridian product, including a double skinned, bead blasted metal chassis found on Meridian’s full size components. This ensures that noise is kept away from critical audio components for lifelike details that are critical for headphone listening. The Meridian Prime Headphone Amplifier can be powered by the wall- mounted supply provided, or by the similarly sized, and styled, Meridian Prime Power Supply for even higher audio quality. The use of an external power supply means that AC noise is kept well away from the pure analogue stages of the Headphone Amplifier. Virtually all the active audio components are at the rear of the unit, as close to the connectors as possible to minimise the audio path length, and are essentially remote-controlled from the front panel. This is even true of the volume potentiometer, a high-quality Alps-type mounted near the rear of the unit, which controls the level of all outputs. A special flexible shaft coupling is employed to avoid microphony, resulting from operation of the volume knob. An analogue output is also provided so the product can be connected to an active loudspeaker, or conventional amplifier and loudspeaker system for a high-performance simple system. A 6-layer circuit board provides ground-planes and maximises signal isolation. The product is DC-coupled, for outstanding low frequency control and overall audio reproduction, and absolute phase is maintained throughout. Technology Meridian Prime will appeal to even to most demanding users with its range of input connectivity, performance, unique features, and build quality. Three front-panel headphone sockets are provided, optimised for purpose. One is a 3.5mm stereo socket for the connection of earbuds and similar devices, which presents an output impedance of 2Ω to suit these devices. The other two sockets offer an exceptionally low impedance (around 3mΩ) and are standard 1/4in stereo (tip-ring-sleeve) types, carrying both channels. They can be used to connect two pairs of headphones, or to attach a single pair of headphones wired with separate cords for left and right drivers, thus offering the opportunity to reduce headphone crosstalk. In addition to simply replaying stereo audio at the highest possible quality via headphones, the outputs also include two “Analogue Spatial Processing” modes, i and ii, which replace the typical “in the head” experience of headphone listening with a smooth, natural feeling of spatiality that is much more like listening on a pair of loudspeakers in front of the listener. The USB conversion system is powered from the interface, meaning that when it is disconnected, all digital circuitry in the unit is deactivated. The fully asynchronous USB 2.0 interface supports signals at up to 192kHz/24-bit sampling and includes Meridian resolution enhancement techniques such as oversampling and Meridian’s unique Apodising filter. Prime Apodising Filter Filters are critical in digital audio. Commonly they introduce distortion and harshness because of "pre-ringing". Early digital recordings suffer from harshness too, due to primitive filters. After painstaking research, Meridian developed a special filter that avoids pre-ringing, so it can be steeper, cleaning up the effects of early filters. The result: a better, cleaner sound from recordings old and new.
Shop now at
TREOO.com
 Tralucent Audio T1 Portable Headphone Amplifier at 13775.00 PHP from TREOO.com
Tralucent Audio T1 Portable Headphone Amplifier
₱ 13,775.00
The T1 portable amplifier has been designed and tuned allowing all genreof music to be expressed naturally to your favorite earphones or headphones. Our criterion for the T1 portable amplifier was to allow this portable amp to exert grip and control over the transducers, while maintaining a highly detailed and accurate presentation. The signature of the T1 allows the listener a real taste of what high endsystems can sound like. The T1 portable amplifier offers unsurpassed soundquality that rivals many portable amplifiers at over twice its price. When you take a first listen to the T1 portable amplifier, you will beastounded by the bass emanating from such a diminutive device. The texture and quality of the bass is supplemented by weight which is an important factor in portraying realism in this frequency range. The way bass notes hangs in the air for that fraction of a second will define the atmospheric ambiance and laying the foundations to your music. The mid range and the high frequency presentation of the T1 portable amp is full, rich and natural sounding with clarity that lets you hear deeper into the recording. Positional cues are excellent, as is the layering of the soundstage. The T1 portable amplifier is highly detailed but at the same time smooth and alluring. The T1 portable amplifier is compatible with all portable players. Included with the T1 is a high quality 3.5mm connection cable for your player, a usb cable for charging and two silicon bands to strap the T1 to your player.
Shop now at
TREOO.com
 Sony Pha-3 Portable Headphone Amplifier & USB DAC at 42457.00 PHP from TREOO.com
Sony Pha-3 Portable Headphone Amplifier & USB DAC
₱ 42,457.00
The Sony Pha-3 High Resolution USB DAC and Headphone Amplifier can help reveal details and layers in the high resolution audio files stored on your PC, smartphone, tablet or music player. The unit converts Hi-Res signals (Pcm up to 384 kHz/32 bit and Dsd) from your device's digital output for you to enjoy through headphones. The D/A conversion technology provides a spacious, three-dimensional soundstage with clear channel separation over the amplifier's balanced output. The device supports PCM files up to 384 kHz/32-bit resolution on a computer, up to 48 kHz/24-bit resolution on an iPhone/iPad/iPod, up to 192 kHz/24-bit through an optical link, as well as 2.8 MHz and 5.6 MHz DSD files. It can deliver a frequency response of 10 to 100,000 Hz with 0.01% distortion into an impedance between 8Ω and 600Ω. When using the balanced output, the amplifier can supply a maximum of 320 mW (at 32 Ω at 1% distortion) to each channel of the stereo pair. The combination DAC and headphone amplifier is compatible with both Windows and Mac OS X computers and comes with: one digital cable for Walkman devices, one digital cable for Xperia mobile devices, two micro-USB cables, one stereo mini audio cable, two USB AC adaptors and four silicone belts.
Shop now at
TREOO.com
 Sony Pha-1A Portable Headphone Amplifier & USB DAC - Silver at 14129.00 PHP from TREOO.com
Sony Pha-1A Portable Headphone Amplifier & USB DAC - Silver
₱ 14,129.00
Enhance Your Music Breathe more life into everything you hear with the sleek, pocket-sized Pha-1A Portable Headphone Amplifier. Engineered to deliver superior sound performance, the Pha-1A enhances the quality of everything you listen to, and brings out the potential of headphones to its full extent. Especially when paired with Hi-Res Audio devices like Sony’s Mdr-1A Headphones plugged into the Walkman ® Nwz-A17, the Pha-1A makes it possible for you to enjoy powerful Hi-Res Audio sound quality wherever you go. A Purer State of Sound Made for true music lovers, the Pha-1A is designed to deliver High-Resolution Audio sound quality for the ultimate music experience. Its Pulse Code Modulation (Pcm) method captures data volume about 6.5 times that of CDs, at a higher sampling rate and bit depth of up to 192kHz/24bit. This reproduces sound characteristics closer to the original recording and picks up on subtle nuances that bring more life and evokes a greater emotional depth as you listen. With a high/normal gain control option, the Pha-1A is ready to drive a multitude of headphones with varying impedance from 8Ω - 600Ω. Surreal Sound, Sublime Music Moments No matter what your music preference is, the Pha-1A delivers studio-sound quality right to your ears. Thanks to Sony’s innovative audio technologies that bring out the best of your music from High-Resolution Audio compatible devices, now, everything you listen to produces a hyper-realistic sensation, as if you were right in the heart of a live performance. Feel Emotion in Every Note The Science Behind the Sound In the pursuit of pure sound quality, the Pha-1A is integrated with Sony’s innovative technologies: equipped with the Wolfson Wm8740 DAC chip that is utilised for high-end premium models, a low-distortion amplifier that operates at a low-noise level, a high 5V power supply offers a high S/N ratio, and an output capacitor-less (Ocl) amplifier ensures minimal sound distortion. High sound quality solder used in the Walkman ® Nwz-A17 delivers natural balances in low-mid-and high-range sound. This makes what you listen to closer to the original recording with more life in every note Engineered for Performance Thanks to the PHA-1A’s wideband performance that spans from 10Hz to 100kHz, you can enjoy a variety of music genres that contain rich, deep bass to radiant highs and listen to vocal melodies and subtle audio harmonics, clearly and naturally. Beyond hearing, the Pha-1A lets you feel every emotion of what you listen to that makes music all the more worth indulging in. Hi-Res Audio On-The-Go Go loud and powerful with the PHA-1A’s USB DAC amp that converts and enhances music data from your portable device, so you can enjoy advanced High-Resolution Audio while out and about. Simply link the USB DAC amp to your headphones and a compatible PC, Xperia™; iPhone, iPad, iPod ® or Walkman ® ; to begin magnifying your music experience on-the-go. Sophisticated in Design, Functional in Size The PHA-1A’s appeal lies in its design. Apart from its sleek aluminium casing that doubles-up as a protection cover from knocks and shocks, its small, lightweight body weighs around 5 ounces (150g), that makes it ultra-portable when you’re out and about. For enhanced convenience, a silicone band is provided for easy carrying when plugged in to other devices.
Shop now at
TREOO.com
 JDS Labs C5 Portable Headphone Amplifier - Slate at 10234.00 PHP from TREOO.com
JDS Labs C5 Portable Headphone Amplifier - Slate
₱ 10,234.00
Audibly Perfect Channel Balance Digital stepped attenuation with zero-crossing detection and 1dB attenuation steps provide smooth volume adjustment at all volume levels, even with sensitive IEMs. DC Coupled Signal Path C5 uses a purely resistive signal path. Thin film, 0.1% tolerance resistors ensure low noise and high channel accuracy. Dual LDO Power Regulation High performance audio starts with clean power. Supply rails are filtered by impressive Tps7A4700 and Tps7A3301 regulators to achieve ultra low supply noise at a constant output voltage of+/-7V. Smart USB Charging Powered by a large 1200mAh Li-Ion battery, C5 quickly charges from any USB port (computer, tablet charger, cell phone charger, etc.). A single LED indicates battery status: solid green while on, blinking while battery is low, or blue while charging.
Shop now at
TREOO.com
 Oppo Ha-1 Wireless Bluetooth Receiver, Desktop Headphone Amplifier & USB DAC - Silver at 63207.00 PHP from TREOO.com
Oppo Ha-1 Wireless Bluetooth Receiver, Desktop Headphone Amplifier & USB DAC - Silver
₱ 63,207.00
The analog audio section of the Ha-1 is a fully balanced design with an emphasis on keeping the audio signal in the analog domain once it leaves the Dac. The Ha-1 is anchored by a hefty toroidal power transformer, and linear power regulators and filters with custom made capacitors ensure that the headphone amplifier has a clean power source with plenty of reserve energy. The fully balanced Class A power amplification section uses hand-picked and paired discrete components to ensure symmetry, and a motor-driven precision volume control knob allows for both manual and remote control volume adjustment while keeping the audio in a pure analog audio path.
Shop now at
TREOO.com
 NuForce Icon DAC Desktop Headphone Amplifier & USB DAC - Black at 14129.00 PHP from TREOO.com
NuForce Icon DAC Desktop Headphone Amplifier & USB DAC - Black
₱ 14,129.00
Icon DAC is a newly designed DAC with very high power headphone amp and supports Android*, PC and Mac. Its performance is as good as the award winning Icon Hdp. Note that DSD playback support is limited to using foobar200 player on the Windows 7 and 8 OS. The innovative NuForce Icon DAC delivers the latest mobile device connectivity by supporting USB Audio for Android (4.1 and beyond with Otg), Mac and PC (with advanced PCM and Dsd), a high-power headphone amplifier, a linear volume control and genuine audiophile construction throughout. With the advent of Smartphones and their enormous storage capabilities, a great many audio enthusiasts have been longing for a quality DAC/headphone amp they can simply plug into in order to experience their favorite music delivered with vivid clarity. The Icon DAC stands as the ideal solution for mobile music listeners seeking audiophile-grade performance. This versatile device features a USB input compatible with typical Windows or Mac computer-based setups, as well as Android 4.1.1* (with optional OTG cable). In addition, employed simply as a headphone amp or preamp the Icon DAC provides a secondary analog input for stereo signals from most home-audio and mobile sources.
Shop now at
TREOO.com
 V-Moda Vamp Portable Headphone Amplifier & USB DAC for iPhone 4/4S at 28293.00 PHP from TREOO.com
V-Moda Vamp Portable Headphone Amplifier & USB DAC for iPhone 4/4S
₱ 28,293.00
Spy-worthy gadget for the modern audio connoisseur ushers in a new era of pure sound, sophistication and power. Vamp features a 150mW x 2 amplifier, dedicated pure Digital-Analog-Convertor, VQ audio enhancements, optical audio output and backup battery all integrated into a solid metal case that transforms an ordinary iPhone 4/4S into a sophisticated and stylish high fidelity device. Powerful Amplifier A 150mW x 2 amplifier bypasses the iPhone's internal amp designed for smaller, low-impedenance ear buds and provides optimal power to drive even the most demanding and high-impedance headphones*. VAMP's rotary volume knob allows you to finely adjust the volume and its hi/lo gain switch adjusts the output level to match the power required for both low and high-impedance headphones. *High-impedance headphones and professional / studio headphones require or benefit significantly from a headphone amplifier Pure Dedicated Digital to Analog Convertor VAMP's dedicated DAC extracts the iPhone's digital output and converts it into its analog form for the purest and unparalleled audio listening experience. VQ Audio Enhancement Vamp offers two, selectable, audio modes for the discerning audiophile. Pure mode (indicated by the red light on the LED toggle switch) outputs audio in its original form VQ mode (indicated by the green light on the LED toggle switch) adds a slight spatial 3D soundstage, tightened bass and increased treble attack that invigorates an all around sensory experience Optical Audio Output A S/PDIF/Toslink digital audio output transforms the iPhone into a high fidelity source (optical cable sold separately). Maximum Battery Vitality A colossal 2200mAh lithium-ion battery provides up to 8 hours of playback. In a flick of a switch, the battery can serve as a backup power source and double the iPhone's battery life. Brushed-Metal Case Aircraft-grade brushed metal and shock absorbing silicone shields the iPhone from dents, breaks and scratches.
Shop now at
Takatack
FiiO K1 Portable DAC And Headphone Amplifier at 2495.00 PHP from Takatack
FiiO K1 Portable DAC And Headphone Amplifier
₱ 2,495.00
Shop now at
Lazada
Darkvoice 336SE Tube Headphone Amplifier at 13340.00 PHP from Lazada
Darkvoice 336SE Tube Headphone Amplifier
₱ 13,340.00
Shop now at
TREOO.com
 NuForce Icon uDAC-2SGE Portable Headphone Amplifier & USB DAC - Signature Gold Edition at 20538.00 PHP from TREOO.com
NuForce Icon uDAC-2SGE Portable Headphone Amplifier & USB DAC - Signature Gold Edition
₱ 20,538.00
A must-have laptop companion! Discover digital music's true headphone potential. The NuForce uDAC-2 Signature Gold Edition is a high-performance 24bit/96kHz USB Digital Audio Converter (Dac) that connects your personal computer's audio to your home stereo, desktop sound system, or headphones. The subtle brilliance of the Swarovski crystal gracing the uDAC-2 SGE’s volume control, along with the unit's lustrous gold-plated case, allude in handsome fashion to its no less attractive performance capabilities. For the eye as well as the ear, the uDAC-2 SGE cannot but enhance the most elegant desktop array. With its extensive power supply, filtering capabilities and charge-pump circuit as a foundation, the uDAC-2 SGE processes incoming data via a USB audio receiver. A D/A converter chip then translates the data to a 2V analog signal. uDAC-2 SGE's performance equals or exceeds that of many audiophile CD players. Its exemplary flexibility -- analog Rca, digital coaxial, and high-performance headphone outputs -- is bound to satisfy the needs of the most critical music lover.If you own a laptop and love music, you need a NuForce uDAC-2. If you're a gamer, uDAC-2 brings realistic sound effects that put you in the game. Powerful sound in a small, affordable package. Don't let its diminutive size fool you: the uDAC family packs a proverbial punch when it comes to improving the sound you get from your computer, meeting or exceeding the performance of audiophile-grade CD players. uDAC is also flexible: its outputs include analog Rca, digital coaxial, and high-performance headphone outputs to accommodate most computers and self-powering headphones. Why the little uDAC can make such a big difference. The DAC (Digital Audio Converter) in most laptops are typically not designed to deliver best-quality sound. This can result in subtle errors in the rebuilding process, diminishing audio quality. Advanced NuForce DACs create a warmer, more detailed approximation of the source file. Audio sounds richer and fuller, with more clarity on the high and and more depth and power in the mids and lows. You'll hear details in your favorite music you never heard before. Your favorite headphones and speakers reproduce sound to their full potential. About Asynchronous USB Audio The uDAC-2SE (Special Edition) and uDAC-2SGE (Signature Gold Edition) are designed for Asynchronous USB Audio mode. The difference between synchronous and asynchronous USB audio is detectable by most, but best left for the individual audio enthusiast and audiophile to decide. That's why if you're new to appreciating high-quality USB audio, we recommend that you start with our baseline uDAC-2 model without Asynchronous USB Audio to avoid the more involved setup required for AA. If you ever decide to upgrade to a uDAC-2SE, we provide the option to purchase a kit (Sgd $189) that includes a replacement circuit board and stainless steel front and back panels* *For more information, please refer to the Async USB Audio FAQ and Setup Guide. No matter what uDAC you choose to start with, you can expect to hear detail, warmth and clarity from your computer's digital audio files you've never heard before. On listening at low volumes: If you're using the uDAC-2 with sensitive in-ear earphones and listening at low volume, please read this article about channel imbalance issues . Notes For Recording Engineer: The uDAC-2 is designed for consumer playback of digital music and has not been calibrated for professional recording. At the 9 o'clock volume indicator, there is hardly any signal; further, analog pots do not behave reliably. At normal listening levels, the volume tracking is within 1dB. The uDAC-2 volume maxes out at around 0dB input (maximum digital input). Thd+N around 1% is intentional to target the voltage rail limit in order to achieve the loudest possible, but distortionless, music playback. Short of 1% THD at 0dB input, the Dac2 is not at its voltage limit, which results in diminished volume for music.
Shop now at
TREOO.com
 NuForce Hap-100 Desktop Headphone Amplifier - Black at 28293.00 PHP from TREOO.com
NuForce Hap-100 Desktop Headphone Amplifier - Black
₱ 28,293.00
The Hap-100 is a preamp and headphone amplifier for the audio enthusiast for whom quality headphone listening is a priority. The HAP-100's innovative design offers features never before available at its modest price point. Most significantly, the Hap-100 shares technologies first employed in our flagship P-20 preamp, along with other audiophile-grade developments. As with the remarkable P-20, the Hap-100 exploits NuForce's most recent work in volume controls. At the unit's core is a switched-resistor ladder network of low-noise, thin-film resistors, one per volume setting, permitting discrete, high-resolution increments of 1dB for the HAP-100's one hundred volume steps.
Shop now at
TREOO.com
 Lear Fsm-02V2 Portable Headphone Amplifier - Black at 21211.00 PHP from TREOO.com
Lear Fsm-02V2 Portable Headphone Amplifier - Black
₱ 21,211.00
Lear Fsm-02V2 is an integrated high-fidelity grade headphone amplifier with flexible and outstanding functions! Fsm-02V2 is built with a total of 2 stage amplification circuits, plus an individual Mosfet Class-A channel; They are the individual hardware EQ (Equalizer) plus individual power amplification and the individual switchable Mosfet Class-A output stage. Each of the EQ and power amplification circuit has a 3 step control, which can be used to select the Crystal clear high, completely Bypass or powerful bass sound style and also the Low, Mid or High Gain for perfect matching with different impedance earphones and headphones. The Mosfet Class-A channel is switchable with the 3 step On/Off switch and output directly from an individual 3.5mm headphone jack. There are no OPAMPs or fixed circuit design which can work perfectly with all headphones, so we made the Fsm-02V2 to become Opamp exchangeable plus amplifier module exchangeable, it lets you to make your own choice of OPAMPs or fined tuned module selection , they give the best performance for any of your gears! The exchangeable power amplification stage means you can exchange Lear or 3rd party designed and made module (it can be an special tuned parallel Opamp module with own gain stage or the sound enhancement effect module ...etc.)to achieve their special goals! Fsm-02V2 supports an external power supply from Dc5V~18V, so it can easily become one of your high quality desktop amplifier, and also the built in Li-Poly rechargeable battery can be charged via USB and work at the same time! At least 6 different sound style inside 1 machine when using with any headphones (There are 2 EQ+Bypass for both Phone out and independent Class-A out) OPAMPs (1 for EQ stage , 1 for output amplification and 1 for Class-A) are exchangeable.Amplifier module is user exchangeable (Announced later on http://lear.hk),replace by Lear or 3rd party design! 3 step (Lo/Mi/Hi) Gain control for the best matching with both low and high impedance earphones/headphones. Independent Mosfet Class-A output for enjoy the "Tube Amp" sound at the independent 3.5mm output jack(Normal output and Class-A output are separated to 2 independent 3.5mm headphone jack and which is on/off selectable via a 3 step switch) Built in 3000mAh Li-poly rechargeable battery and charging via standard USB or Dc5V USB adapter. Support External power supply form Dc5V to 18V (Regulated power supply is recommended), simply change the Fsm-02V2 to a desktop grade amplifier. Optional Ultra Performance Module upgrade is available. Features of the UPM upgrade: 4 times output power than factory default. No more power hunger. Overall performance is almost reaching to the physical limit. Still near Zero Output Impedance. Drive any earphones/headphones to their original sound Reliable partner and reference source to the earphones/headphones R&D engineer. We used to R&D LEAR's earphones. Plug and Play design, no DIY technique required.
Shop now at
TREOO.com
 JDS Labs Objective2 + Odac Combo Desktop Headphone Amplifier & USB DAC - Silver at 15545.00 PHP from TREOO.com
JDS Labs Objective2 + Odac Combo Desktop Headphone Amplifier & USB DAC - Silver
₱ 15,545.00
The O2+Odac combo is an Objective2 headphone amplifier with an Odac installed in the same enclosure. O2 is an open source amplifier designed by NwAvGuy, with emphasis on benchmark performance and low cost. Odac is a digital-to-analog convertor designed along the same principles of maximum performance and value. Together, O2+Odac deliver reference grade audio performance at a fraction of the price of comparable equipment. The O2+Odac requires a mini-USB cable (included) and AC power adapter suitable for your region. Please note that the O2+Odac does not contain batteries. Choose the separate Objective2 and Standalone Odac if you require a rechargeable configuration. Note: You need a separate power adapter with this device. If you do not have one, please add the G.e.z. 15Vac Power Adapter to cart.
Shop now at
TREOO.com
FiiO FiiO E02i Rocky Portable Smartphone Headphone Amplifier - Silver at 1416.00 PHP from TREOO.com
FiiO FiiO E02i Rocky Portable Smartphone Headphone Amplifier - Silver
₱ 1,416.00
-
Shop now at
Lazada
AD Dvon AD Headphone Amplifier HA400 w/ Power Adapter(Silver) at 1760.00 PHP from Lazada
-12%
AD Dvon AD Headphone Amplifier HA400 w/ Power Adapter(Silver)
₱ 1,760.00 ₱ 2,000.00
Shop now at
TREOO.com
 Teac Ud-H01 Desktop Headphone Amplifier & USB DAC - Silver at 18236.00 PHP from TREOO.com
Teac Ud-H01 Desktop Headphone Amplifier & USB DAC - Silver
₱ 18,236.00
Stream Audio via USB from Your Windows or Mac PC at Better-Than-CD Quality. Streaming Digital Audio via USB Better-Than-CD Quality Playback The Ud-H01 digitally transfers audio source materials stored on a computer at up to 24bit/192kHz for streaming playback. The Ud-H01 supports USB asynchronous mode, using the precise internal clock to control timing and eliminating jitter issues. This allows optimal playback of high-resolution digital audio files from playlists/libraries on your iTunes, Windows Media Player or similar playback programs. 192kHz Up-Conversion to Reduce Jitter Even Further All digital input signals are converted to 192kHz via non-integral up-sampling, dramatically reducing jitter and allowing consistent D/A conversion based on the high-precision internal clock. Asrc conversion is used to produce a natural, 192kHz high-sampling rate digital audio signal. Dual-Monaural Configuration with Independent Left/Right D/A Converters The Ud-H01 incorporates two BurrBrown Pcm1795 D/A converters, one for each channel. The dual-monaural configuration eliminates interference between the channels for maximum performance from the D/A converters. A shunt-regulator circuit supplies the current to the D/A converters in order to eliminate ground noise generated by fluctuations in the supply voltage. Refined Analog Circuit Design for a Simple Signal Path The analog circuit design features a left/right symmetrical configuration to ensure signal paths of identical length for the left and right channels. The Ud-H01 incorporates a Muses 8920 FET input operational amplifier with outstanding I-V conversion performance for high-quality analog output, including headphones output. High-Performance Power Supply to Guarantee the Maximum Performance from all Components and Circuits The Ud-H01 uses a high-capacity toroidal-core power supply transformer capable of providing a stable current with high efficiency. This minimizes flux leakage and eliminates noise generated by electromagnetic induction. Ideal as a High-Quality Headphone Amplifier as well The same high-quality operational amplifier used for line output is used for headphone amplifier output. A dedicated high-quality aluminum knob controls headphone volumes. This allows users to enjoy a high-sampling-rated digital audio in spaces with neighbors close by, or other situations where speaker playback might disturb others. Input/Output Terminals for Incorporation into Full-Scale Hi-Fi Systems The Ud-H01 features coaxial and optical S/P DIF digital audio inputs and a USB port to allow use as a high-quality D/A converter. Output terminals include gold-plated RCA connectors, line-level output and XLR balanced output terminals for connection to a full-fledged high-end operation amplifier. The unit features a professional-style 3-pin power socket.
Shop now at
Lazada
Little Dot MKI+ Gold Edition Mini Portable Headphone Amplifier at 8980.00 PHP from Lazada
Little Dot MKI+ Gold Edition Mini Portable Headphone Amplifier
₱ 8,980.00
Shop now at
TREOO.com
 Nuforce Icon-2 Desktop Headphone Amplifier & USB DAC - Blue at 19405.00 PHP from TREOO.com
Nuforce Icon-2 Desktop Headphone Amplifier & USB DAC - Blue
₱ 19,405.00
"The heart of your digital life" Operating from a technology platform that has won Nuforce numerous awards and rave reviews, Nuforce’s Second-Generation Icon is an audiophile-grade Integrated Desktop Amplifier featuring two 24-watt outputs for speakers, a 3.5-mm stereo input for connection to an iPod or other portable device, a USB DAC (24bit/96KHz high resolution) for converting digital music from the computer, and standard RCA inputs for employing the Icon as the heart of a conventional audio system. For the headphone enthusiast, the Icon also offers a high-performance headphone output. Of particular interest to the computer user, the Icon’s line-out functions as a PC or Mac USB-to-analog audio converter or can also be used as a connection to a subwoofer. Rj45 Pin Specifications Note: The Rj45 pin specification is provided for users who need to create a long speaker wire using standard ethernet cable. Users can also extend the length of the standard Icon-2 speaker cable using a Rj45 Coupler. Note: Icon-2 is not compatible with S-1 speakers.
Shop now at
TREOO.com
 Oppo Ha-2 Portable Headphone Amplifier & USB DAC at 16607.00 PHP from TREOO.com
Oppo Ha-2 Portable Headphone Amplifier & USB DAC
₱ 16,607.00
The Ha-2 is an elegant yet sophisticated portable headphone amplifier with built-in rechargeable battery. It is engineered to enhance music playback from mobile phones and portable music players. Aesthetically, the Ha-2 does not look like a typical or generic electronic device. Its genuine leather casing with contrast stitching and beveled aluminum edges are eye-catching and cannot be confused with any other product. Its fit and finish will instill a sense of pride when using the product. Featuring hybrid class AB amplification and a USB DAC that supports 384 kHz PCM and Dsd256, the Ha-2 offers high performance digital-to-analog conversion for Apple’s iPhone/iPod products, a wide range of Android devices, PC and Mac computers. The Ha-2 may be conveniently used to charge mobile devices on-the-go and itself can be efficiently charged in 30 minutes. Headphones, from very sensitive In-Ear Monitors to the most power-hungry Over-the-Ears, can all benefit from the HA-2’s excellent performance and powerful amplification. With smartphone use increasing all the time, users are often carrying a device that is capable of storing high quality audio files. The Ha-2 is a very mobile-centric portable headphone amplifier and DAC that pairs exceptionally well with iOS and Android devices, and it can offer a significant improvement in sound quality over the amplification and DAC available in the mobile device itself, without adding excessive bulk and weight so as to make the combination inconvenient. Other mobile-friendly features such as rapid charging and mobile device power bank make the Ha-2 a true companion for music on the go. The Ha-2 offers two USB DAC input ports - one for Apple’s iPhone/iPod, and the other for Android devices, PC and Mac computers. A 3.5 mm input works with the remaining portable music players that do not have a USB-compatible digital output. There are two gain level settings. The High Gain mode is capable of driving large power-hungry headphones, delivering up to 300 mW into 16-Ohm headphones. The Low Gain mode is intended for sensitive In-Ear Monitor type earphones. In addition to the two gain levels, the Ha-2 offers two stages of volume control to precisely dial the desired output volume and to resolve the volume disparity issues between using In-Ear Monitors and full-size headphones. By mapping USB volume control commands to the Sabre DAC chip's internal digital volume control, users can adjust the signal volume using the playback app or software without losing audio resolution or causing bit truncation. The HA-2's analog volume control knob can then be used to further adjust for a comfortable listening level. For users who like a bit more punch and impact with their music, the Ha-2 offers a Bass Boost function that is implemented purely with analog audio circuits.
Shop now at
Takatack
FiiO A1 Portable Headphone Amplifier at 1495.00 PHP from Takatack
FiiO A1 Portable Headphone Amplifier
₱ 1,495.00
Shop now at
TREOO.com
 Teac Ha-501 Desktop Headphone Amplifier - Silver at 35375.00 PHP from TREOO.com
Teac Ha-501 Desktop Headphone Amplifier - Silver
₱ 35,375.00
Introduce yourself to TEAC’s Ha-501, a fully analog, dual monaural headphone amplifier with elegance. Part of the 501 series, this Class-A amplifier delivers superior sound quality, a sleek, modern look, all encased in a rugged but compact design. The Ha-501 supplies regular headphone listeners with quality sound, features and adaptable options that cannot be found in regular amplifiers. Pair it with your favorite headphones the same way you would a normal amp with favored speakers and take advantage of DC Servo Technology, Switchable damping Factors, High Output Power, a large Toroidal-Core Power Transformer and relax to your favorite music or radio broadcast. A headphone amplifier to achieve peak headphone performance In general, a headphone output from conventional hi-fi components does not allow even high-quality headphones to perform at their peak potential. The same way one chooses an amplifier to match with your favorite speakers, it is very impotant to chosse an appropriate headphone amplifier that matches your favorite headphones. A headphone amplifier is a "must-have" listening device for audiophiles. Active DC Servo Technology for decreased distortion, and discrete Class-A Amplifier In order to develop a first-class low distotion Class-A headphone amplifier, Teac held a series of sound evalutions during the development. These tests led to the careful choosing of parts and descrete circuit design. In addition, like most full-size hi-fi components, in order to eliminate Offset Electrical Potential, Active DC Servo Technology is utilized. Dual Monaural Design that eliminates interference between Left and Right channels In regards to the circuit design, each channel is completely designed on an individual basis to avoid signal interface to/from another. This contribution eliminates cross-talk, crucial headphone listening. Muses8920 Op-Amps - for high-end quality Muses8920 Op-Amp chip-sets are designed for high-end audio. Employed individually on the Left and Right channels, they help achieve superior sound. This Op-amp performs superb IV-conversion and is already very well regarded and used in a wide-range of hi-fi components. Large Toroidal-core Power Transformer An over-sized Toroidal-core power transformer is also employed to supply stable current to the every part of the circuit. Damping Factor Selector to optimize headphones' characteristic Each pair of headphones has its Damping Factor, a resisting force against non-intentional movement of the diaphram moving air forwards and backwords as sound. The value of the Damping Factor varies model by model, as diaphrams are made by different materials, in different shapes or different construction designs. Since headphones' diaphrams are activated by a very small current compared to conventional speakers, the damping factor increases, the sound is lean and crisp, and has a close relationship with headphones' impedance. Therefore, selecting the right Damping Factor is crucial in order for your headphones to perform at their peak potential. The Ha-501 provides 5 selectable Damping Factors, so users have the best suited signal for multiple headphones. Total 2,800mA of output power drives your high impedance headphones The Ha-501 schieves a remarkable 1,400mW output power per channel at 32 ohms impedance. The divice delivers not only enough power to drive standard headphones with an impedance range from 80 to 250 ohms, but also high-class 600 ohms hi-fi headphones. Robust Aluminum Body with a Classy Appearance Re-defining high class hi-fi components, the Ha-501 has a small footprint, classy appearance and is constructed with aluminum panels to create an authentic but modern looking hi-fi component. A robust metal construction helps eliminate vibrations that may affect the sound quality. The bottom and sidewalls are formed with a steel chassis, aluminum for the front panel and the rear panel out of steel. In order to ensure it's rugged design, each panel is connected with a beam that runs through the center of the unit. Normally, this type of construction is only for full-size components, particularly CD players that generate inherent motor vibrations. This construction ensures the Ha-501 is an authentic hi-fi component that will last you for many years. Choose between a handsome black version and a brilliant silver version to match with any interior or design. Well-designed User Interface Another remarkable feature of the Ha-501 is the user-friendly design. The firm-torqued volume control allows users to adjust the volume level with ease and precision while the toggle-type power switch assures On/off operation at a glance. Auto-muting function protects your ears from unexpected loud sounds when switching between headphones with different levels of impedance. Professional grade Input/Output connectors On the rear panel, a pair of Neutrik brand XLR input connectors allow users to connect high-end components or professional audio equipment, while wider-pitch RCA pin jacks allow user to connect large-shaft RCA pin cables from other markets. A detachale type 3-polar power inlet socket is also avalable. On the front, a 3.5mm stereo mini-jack allows users to connect a portable music player such as an iPod, conveniently. Switchable Output Mode for flexibility Line output level from the rear panel can be swiched amongst "Fixed Level", "Variable Level (coupled with volume)" and "Off".
Shop now at
TREOO.com
 Chord Hugo Portable Headphone Amplifier & USB DAC - Satin Black at 99148.00 PHP from TREOO.com
Chord Hugo Portable Headphone Amplifier & USB DAC - Satin Black
₱ 99,148.00
Chord Electronics Hugo USB reference grade DAC plus headphone amp is a reference-level portable product for PCM and DSD audio – a world first in audio history and the unit is based on the same Fpga DAC technology that has helped establish Chord Electronics as an authority in digital audio. The unit is called Hugo (because you can take Hugo wherever ‘you-go’); the new device offers studio-master-tape sound quality, advanced connectivity and uncompromising file playback capability, all from a palm-sized player. Hugo is the world’s most advanced headphone amp/DAC, offering five digital inputs including A2Dp aptX Bluetooth, plus advanced 384kHz PCM and DSD 128 playback for today’s high-resolution DXD (Digital eXtreme Definition) music files. The new Hugo, which can be used as both a portable headphone amp/DAC as well as a reference-level source component in a static system, brings the renowned digital audio expertise of Rob Watts and Chord Electronics to serious headphone listening, enabling consumers to experience a world of super-high-resolution music via their headphones. It offers unsurpassed performance and technology and is unrivaled in the marketplace, thanks to its bespoke technology, Fpga circuitry and advanced file-playback capability.
Shop now at
TREOO.com
Creative Creative Sound Blaster X-Fi HD Desktop Headphone Amplifier & USB DAC at 5276.00 PHP from TREOO.com
Creative Creative Sound Blaster X-Fi HD Desktop Headphone Amplifier & USB DAC
₱ 5,276.00
Premium USB Sound Blaster quality Audiophile-grade components deliver unsurpassed USB sound card audio quality with a signal-to-noise ratio (Snr) of 114dB. SBX Pro Studio for unprecedented audio realism The ground-breaking SBX Pro Studio sound effects will transform your experience into a true High-Definition (Hd) multimedia emotional journey. Direct recording from your turntable Phono preamp with Riaa EQ allows direct connection of your turntable to the USB sound card to conveniently convert your vinyl to CDs or MP3s. Superior headphone experience High quality headphone amp supports studio-quality headphones (e.g. Hardware accelerated EAX 5.0 for ultimate gaming audio Hardware-powered 3D positional audio and EAX 5.0 effects provide stunning audio realism over both headphones and speakers without affecting your frame-rates. Works with Windows 8 We have updated audio drivers that will allow you to enjoy the ultimate in Sound Blaster performance in Windows 8.
Shop now at
Filgifts
Sony Sony Portable Headphone Amplifier at 51387.00 PHP from Filgifts
Sony Sony Portable Headphone Amplifier
₱ 51,387.00
SPECIFICATIONS:
* Dimensions (W X H X D): Approx. 80 mm x 29 mm x 140.5 mm
* Weight: 230 g
* Frequency Response (HZ): 10-100 kHz
* Impedance (OHM): 8-600
* Volume Control: Rotary volume
* Connection Cable: (Digital cable for WALKMAN, Digital cable for Xperia, Stereo mini cable)
Silicone belt (x 4)
Shop now at
Lazada
Bravo Audio V1 Valve Class A EH6922 Tube Headphone Amplifier at 3430.00 PHP from Lazada
Bravo Audio V1 Valve Class A EH6922 Tube Headphone Amplifier
₱ 3,430.00
Shop now at
TREOO.com
FiiO FiiO E18 Kunlun Portable Headphone Amplifier & USB DAC for Android (Demo Unit) at 8817.00 PHP from TREOO.com
FiiO FiiO E18 Kunlun Portable Headphone Amplifier & USB DAC for Android (Demo Unit)
₱ 8,817.00
Shop now at
TREOO.com
 iRiver Astell&Kern Ak380 Amp Docking Portable Headphone Amplifier - Meteoric Titan at 38916.00 PHP from TREOO.com
iRiver Astell&Kern Ak380 Amp Docking Portable Headphone Amplifier - Meteoric Titan
₱ 38,916.00
The AK380's First Accessory, AMP The primary goal of Astell&Kern has always been to deliver the original sound. We're proud to introduce the Ak380 Amp, an amplifier that supports high-impedance headphones and high-gain output while remaining faithful to the original sound. Expansion-type amplifier with design unity. 3,400 mAh large-capacity battery. 8.1 Vrms high-gain balanced output. 4.1 Vrms unbalanced output. Introducing Ak380 Amp, the first accessory to complement the Ak380. High Gain The Ak380 AMP supports 8.1 Vrms output when connected via high-gain balanced output. High-gain output is four times greater than low-gain output and supports high-impedance headphones. To protect earphones/headphones during high output, the volume is automatically adjusted when the amp is powered on or the earphones/headphones are disconnected. Furthermore, the gain can be easily adjusted via the AK380's settings. 3,400 mAh Large-capacity Battery An amplifier, which increases audio output, consumes a great amount of energy. Thus, the Ak380 AMP features a 3,400 mAh large-capacity battery – identical to the one in the Ak380 itself - to support up to nine hours of continuous unbalanced-output playback.
Shop now at
Lazada
FiiO K1 Portable DAC and Headphone Amplifier at 2495.00 PHP from Lazada
FiiO K1 Portable DAC and Headphone Amplifier
₱ 2,495.00
Shop now at
TREOO.com
 Shonyun Sh-306A Portable Headphone Amplifier at 9525.00 PHP from TREOO.com
Shonyun Sh-306A Portable Headphone Amplifier
₱ 9,525.00
The new and upgraded version Shonyun-306A up from the older Sh-306. The Sh-306A is a portable mini stereo headphone amplifier. Compared with the older version, the new 306A circuit architecture is similar but with numerous upgrades. The customised, high-quality and high-capacity lithium battery pack is not only high in capacity and discharge current, it is also able to provide plenty of power amplifier supply. The new model also sports a patch to the capacitor polarity line, greatly reducing the internal resistance to make the sound more clear, bright and powerful. The new 306A portable amplifier output has been increased by optimizing the power design. You can now better drive your big full-size headphones. In addition to better drivers, this portable amp also has a smart charge and discharge lithium battery monitoring circuit. Once the battery discharge goes below the preset voltage, the protection circuit will cut off power to ensure the safety of the device and headphones. And once it is charged full, the protection circuit will cut off the charging power supply immediataly for the same safety reasons. The Shonyun 306A uses the original imported Japanese Alps potentiometer push-pull feature, not only does it click with a beautiful sound, it is reliable and easy to use. Simply press the potentiometer knob to pop it out, then adjust the volume accordingly. Once the volume is set, you may press the knob again to retract it into the device for protection of the knob as well as a better appearance. An innovative design is such that the when a headphones is connected to the 3.5mm port, the circuit is closed and turns on the 306A; unplug the headphones and this switches off the 306A. The 306A is rated to driver 16 ohms to 300 ohms headphones and earphones. Some known models that work best when tested were the AKG K701, K601, Technica Ad900, Etymotic Er4S and Yuin Pk1. Headphones with higher impedance are perfect for the 306A, a good choice to make this amplifier perform to its best.
Shop now at
Lazada
Little Dot PA_V Portable Headphone Amplifier at 16189.00 PHP from Lazada
-5%
Little Dot PA_V Portable Headphone Amplifier
₱ 16,189.00 ₱ 17,189.00
Shop now at
Lazada
 OH XU09 Portable Hifi Headphone Amplifier Mini High Fidelity Music Amplify Black (Intl) at 1963.00 PHP from Lazada
-66%
OH XU09 Portable Hifi Headphone Amplifier Mini High Fidelity Music Amplify Black (Intl)
₱ 1,963.00 ₱ 5,889.00
Shop now at
TREOO.com
 Lehmann Audio Linear Desktop Headphone Amplifier & USB DAC - Silver at 56656.00 PHP from TREOO.com
Lehmann Audio Linear Desktop Headphone Amplifier & USB DAC - Silver
₱ 56,656.00
Already since 2004 the Linear has made all common headphones to shine at their very best. Extremely demanding users rely on our top model, from the West German Broadcasting Corporation to the audiophile Tacet label to Sennheiser's and AKG's headphone experts. It’s not without reason that the Linear belongs to the reference class in its genre. When you put on your headphones and load your favourite CD, the Linear will give rise to wonderful worlds before your mind’s eye. Physical, punchy lows and a delicate resolution reveal your favourite tracks in all their glory over the entire frequency bandwidth. Carefully selected components and an extremely sophisticated circuit design establish the foundation of our number on. "The best we've come across." — What Hi-Fi A universal champion With three gain settings it gives you an impressive listening pleasure, keeping an eye on your needs anytime – and this using a vast array of headphones on the most diverse sound sources. In this context we have, of course, taken into account the varying performance requirements and sensitivity levels of the headphone types currently available on the market. If you want to enjoy your musical treasures via PC or iPad, the Linear with the optional USB feature offers the solution. And if you would like to share your joy at this quality of music reproduction with family and friends, our multiple test winner will be happy to feed two headphones at the same time. Of course, the listening enjoyment will remain equally fabulous then. The two parallel outputs of the discrete class A solid-state output stage.provide the basis of this double musical enjoyment. A propos: if you wish so, the Linear will also stimulate your active speakers to a stunning vitality. In every situation a magnificent sound, always striving for perfection – such is our Linear.
Shop now at
TREOO.com
 NuForce Mobile Music Pump Portable Headphone Amplifier - Black at 2797.00 PHP from TREOO.com
NuForce Mobile Music Pump Portable Headphone Amplifier - Black
₱ 2,797.00
The NuForce Mobile Music Pump (Mmp) is a portable headphone amplifier designed to make your music truly come alive… wherever you go. The fact is that the majority of hand-held audio playback devices simply aren't capable of adequately powering many of today's quality headphones. This is because headphones present a definite challenge to amplifier designers. There are two basic types: the Over-Ear (Oe) in general use in the recording industry, and the smaller In-Ear (Ie), a.k.a. "ear-bud" type commonly used with portable devices such as MP3 players. Given the range of available OE and IE headphones, in attempting to accommodate them all, your mobile device’s headphone output is optimized for none. Typically, OE types exhibit sensitivities of about 100dB/mW, whereas IE devices can be 10dB higher or more, e.g., 110dB/mW. Assuming a 10dB difference, the lower sensitivity OE headphones require ten times more power to achieve the same volume as the IE type. If you’re using OE headphones, you’ll really appreciate the NuForce MMP power capability. Your headphones will sound distinctly clearer and more natural. Just connect the MMP to the headphone output of your MP3 player, Smartphone, iDevice, etc. and finally start experiencing the higher level of performance your headphones were always capable of.
Shop now at
TREOO.com
FiiO FiiO A3 Portable Headphone Amplifier - Silver at 3152.00 PHP from TREOO.com
FiiO FiiO A3 Portable Headphone Amplifier - Silver
₱ 3,152.00
Shop now at
TREOO.com
 Audinst Hud-Mx1 Desktop Headphone Amplifier & USB DAC at 10588.00 PHP from TREOO.com
Audinst Hud-Mx1 Desktop Headphone Amplifier & USB DAC
₱ 10,588.00
Shop now at
TREOO.com
 Oppo Ha-2Se Portable Headphone Amplifier and USB DAC at 16961.00 PHP from TREOO.com
Oppo Ha-2Se Portable Headphone Amplifier and USB DAC
₱ 16,961.00
High-Resolution Audio Meets Style and Design Ha-2Se is an elegant yet sophisticated portable headphone amplifier with a built-in rechargeable battery. It is engineered to enhance music playback from mobile phones and portable music players. Its genuine leather casing with contrast stitching and beveled aluminium edges are eye-catching. It can be used to charge mobile devices conveniently on-the-go, and itself can be efficiently topped-up in 30 minutes. High Performance Audio Hybrid Class AB Amplifier The HA-2SE's power amplification circuit for the headphones is Class AB built with integrated circuits (ICs) and discrete transistors. The discrete transistor output stage uses hand-picked and matched parts. The output transistors are biased to operate in their most linear range for the critical small signal, and deliver their full potential when power is required. Clean Signal Path There is no DSP (Digital Signal Processor) in the Ha-2Se. Volume control is operated by a combination of the DAC chip's internal digital volume control and an analog potentiometer (the familiar volume knob). Bass boost is performed by pure analog audio circuits. By avoiding re-digitizing the audio signal for volume adjustment or bass boost, the Ha-2Se provides a clean signal path for the audio. Audio-In and Line-Out The Ha-2Se has a 3.5 mm Audio-In port to support portable music players that do not have a USB-compatible digital output. While the Ha-2Se is used with one of its USB digital input ports, the 3.5 mm jack acts as Line-Out for the USB Dac. ESS Sabre32 Reference DAC The DAC is one of the most important components for digital audio playback. The Es9028-Q2M DAC chip used in the Ha-2Se is the latest flagship mobile DAC developed by ESS Technology. With the ESS patented 32-bit Hyperstream™ DAC architecture and Time Domain Jitter Eliminator, the Sabre32 Reference DAC delivers an unprecedented performance for mobile applications. Asynchronous USB DAC By bypassing the smartphone's built-in DAC and headphone amplification circuit that are often cost-constrained, the Ha-2Se turns a smartphone into a high performance digital audio player. The asynchronous USB DAC input of the Ha-2Se also works with PC and Mac computers to replace the built-in sound card and support high-resolution audio playback with PCM up to 384 kHz 32-bit and DSD up to 12 MHz (Dsd256). Bass Boost For those who like a bit more punch and impact with their music, the Ha-2Se offers a Bass Boost function. With Bass Boost off, the Ha-2Se delivers a ruler-flat frequency response; with Bass Boost on, the Ha-2Se adds force and impact to the sub-bass region without muddling the important mid- to high-frequency bands. Two Gain Settings The Ha-2Se offers two gain level settings for optimal headphone matching. The High Gain mode is capable of driving large power-hungry headphones, delivering up to 300 mW into 16-Ohm headphones. The Low Gain mode is intended for sensitive In-Ear Monitor type earphones. Premium Mobility Made for iPod®; iPhone® and iPad® The Ha-2Se passes Apple's "MFi" certification and is compatible with the latest iPod, iPhone and iPad to be used as the digital audio output accessory of these devices. By tapping directly into the digital audio signal of these devices and converting the audio to analog using the high performance Sabre32 Reference Dac, music from your favorite portable device will sound its best. Furthermore, for users with high-resolution music playback apps, the Ha-2Se does not require the use of a Camera Connection Kit (Cck). The data cables that come with your Apple device or the supplied Lightning cable is sufficient. Compatible with Android The HA-2SE’s micro-USB input port works with Android devices that support USB OTG (Usb On-The-Go) and USB Audio Class. A special USB OTG cable is supplied with the Ha-2Se to facilitate the connection. When used with a compatible Android device, the Ha-2Se can support the device's built-in music app, tones and notifications. Additionally, a high-resolution music playback app can use the Ha-2Se as its external DAC to play lossless PCM and DSD audio files. Mobile Power Bank The Ha-2Se functions as an external battery pack to charge your mobile device. Utility and convenience are factors we wanted to address with the Ha-2Se, so you can ditch the bulky spare battery pack and carry just the Ha-2Se with you mobile phone. Rapid Charging The Ha-2Se features patented Vooc rapid charging technology from Oppo. Using the supplied rapid charger, the internal battery can be quickly and safely charged to 70% capacity in about 30 minutes. It only takes approximately 90 minutes to fully charge the battery. A quick charge gives the Ha-2Se hours of operation time. Build Quality The Ha-2Se is housed in an aluminum chassis wrapped in genuine leather. The beveled metal edges and contrast stitching on the leather are eye-catching. Its fit and finish will instill a sense of pride when using the product. The Ha-2Se meshes equally well in the pocket of an urban Millennial or on the desk of a business executive.
Shop now at
Lazada
FiiO K5 Docking Headphone Amplifier & DAC at 5995.00 PHP from Lazada
FiiO K5 Docking Headphone Amplifier & DAC
₱ 5,995.00
Shop now at
TREOO.com
 Teac Ud-H01 Desktop Headphone Amplifier & USB DAC - Black at 18236.00 PHP from TREOO.com
Teac Ud-H01 Desktop Headphone Amplifier & USB DAC - Black
₱ 18,236.00
Stream Audio via USB from Your Windows or Mac PC at Better-Than-CD Quality. Streaming Digital Audio via USB Better-Than-CD Quality Playback The Ud-H01 digitally transfers audio source materials stored on a computer at up to 24bit/192kHz for streaming playback. The Ud-H01 supports USB asynchronous mode, using the precise internal clock to control timing and eliminating jitter issues. This allows optimal playback of high-resolution digital audio files from playlists/libraries on your iTunes, Windows Media Player or similar playback programs. 192kHz Up-Conversion to Reduce Jitter Even Further All digital input signals are converted to 192kHz via non-integral up-sampling, dramatically reducing jitter and allowing consistent D/A conversion based on the high-precision internal clock. Asrc conversion is used to produce a natural, 192kHz high-sampling rate digital audio signal. Dual-Monaural Configuration with Independent Left/Right D/A Converters The Ud-H01 incorporates two BurrBrown Pcm1795 D/A converters, one for each channel. The dual-monaural configuration eliminates interference between the channels for maximum performance from the D/A converters. A shunt-regulator circuit supplies the current to the D/A converters in order to eliminate ground noise generated by fluctuations in the supply voltage. Refined Analog Circuit Design for a Simple Signal Path The analog circuit design features a left/right symmetrical configuration to ensure signal paths of identical length for the left and right channels. The Ud-H01 incorporates a Muses 8920 FET input operational amplifier with outstanding I-V conversion performance for high-quality analog output, including headphones output. High-Performance Power Supply to Guarantee the Maximum Performance from all Components and Circuits The Ud-H01 uses a high-capacity toroidal-core power supply transformer capable of providing a stable current with high efficiency. This minimizes flux leakage and eliminates noise generated by electromagnetic induction. Ideal as a High-Quality Headphone Amplifier as well The same high-quality operational amplifier used for line output is used for headphone amplifier output. A dedicated high-quality aluminum knob controls headphone volumes. This allows users to enjoy a high-sampling-rated digital audio in spaces with neighbors close by, or other situations where speaker playback might disturb others. Input/Output Terminals for Incorporation into Full-Scale Hi-Fi Systems The Ud-H01 features coaxial and optical S/P DIF digital audio inputs and a USB port to allow use as a high-quality D/A converter. Output terminals include gold-plated RCA connectors, line-level output and XLR balanced output terminals for connection to a full-fledged high-end operation amplifier. The unit features a professional-style 3-pin power socket.
Shop now at
TREOO.com
 Nuforce Icon-2 Desktop Headphone Amplifier & USB DAC - Black at 19405.00 PHP from TREOO.com
Nuforce Icon-2 Desktop Headphone Amplifier & USB DAC - Black
₱ 19,405.00
"The heart of your digital life" Operating from a technology platform that has won Nuforce numerous awards and rave reviews, Nuforce’s Second-Generation Icon is an audiophile-grade Integrated Desktop Amplifier featuring two 24-watt outputs for speakers, a 3.5-mm stereo input for connection to an iPod or other portable device, a USB DAC (24bit/96KHz high resolution) for converting digital music from the computer, and standard RCA inputs for employing the Icon as the heart of a conventional audio system. For the headphone enthusiast, the Icon also offers a high-performance headphone output. Of particular interest to the computer user, the Icon’s line-out functions as a PC or Mac USB-to-analog audio converter or can also be used as a connection to a subwoofer. Rj45 Pin Specifications Note: The Rj45 pin specification is provided for users who need to create a long speaker wire using standard ethernet cable. Users can also extend the length of the standard Icon-2 speaker cable using a Rj45 Coupler. Note: Icon-2 is not compatible with S-1 speakers.
Shop now at
TREOO.com
Creative Creative SoundBlaster E3 Portable Headphone Amplifier & USB DAC at 5984.00 PHP from TREOO.com
Creative Creative SoundBlaster E3 Portable Headphone Amplifier & USB DAC
₱ 5,984.00
HD Headphone Amplifier with Enhanced Audio Quality via Bluetooth! The Sound Blaster E3 is a headphone amplifier that gives you high audio quality performance with music streaming wirelessly to your smart mobile devices. It supports USB audio streaming from the smart mobile devices as well, providing a higher grade of quality than Bluetooth. Enjoy Wireless Freedom via Bluetooth Free up your phone. Music is streamed via Bluetooth (without wires) to the Sound Blaster E3. So even if you chuck your phone into your bag, you can control the music playback, as well as the volume, remotely via the Sound Blaster E3. When a phone call comes in, a simple press of a button on the Sound Blaster E3 allows you to answer the call. Studio Quality Audio - with 600ohm Headphone Support The built-in headphone amplifier supports up to 600ohm, so there are no limits to the type of headphones you can pair with the Sound Blaster E3. For Quality Digital Audio On-the-Go! Sound Blaster E3 functions as a portable USB Dac, which means you can connect it to selected smartphones or tablets via USB cable (Otg cable required) for uncompressed digital audio streaming.
Shop now at
Lazada
Ecci ST6 MK2 HiFi Professional Portable Headphone Amplifier at 5319.00 PHP from Lazada
-11%
Ecci ST6 MK2 HiFi Professional Portable Headphone Amplifier
₱ 5,319.00 ₱ 5,999.00
Shop now at
Lazada
Little Dot MK9 6N9P 6080X2 Tube OCL Tube Headphone Amplifier at 24260.00 PHP from Lazada
Little Dot MK9 6N9P 6080X2 Tube OCL Tube Headphone Amplifier
₱ 24,260.00
Shop now at
TREOO.com
 Audinst HUD-Mini Desktop Headphone Amplifier & USB DAC at 8109.00 PHP from TREOO.com
Audinst HUD-Mini Desktop Headphone Amplifier & USB DAC
₱ 8,109.00
Shop now at
TREOO.com
 Alpha Design Labs X1 Portable Headphone Amplifier & USB DAC - Silver at 23017.00 PHP from TREOO.com
Alpha Design Labs X1 Portable Headphone Amplifier & USB DAC - Silver
₱ 23,017.00
The ADL X1 is a small, discrete, but highly specified DAC/headphone amp with inputs supporting iOS digital at up to 16/48 via Apple MFI certified USB Cable for iPod, iPhone, iPad devices. The X1 also runs 24/192 S/pdif with high-resolution files from PC via the PC’s USB output. There’s an analog line-level 4-pin 3.5mm input and a 4-pin 3.5mm output for headphones in the 12~600 ohm range. The 4-pin input supports 3.5mm Remote and Mic Earphones. The 3.5mm Toslink optical output delivers Spdif up to 24/192. There's also a convenient GND Trrs switch making it easy to change from one 4-pin set of 'phones to another.
Shop now at
Lazada
Little Dot MKI+ Standard Edition Mini Portable Headphone Amplifier at 9159.00 PHP from Lazada
-8%
Little Dot MKI+ Standard Edition Mini Portable Headphone Amplifier
₱ 9,159.00 ₱ 9,959.00
Shop now at
TREOO.com
 NuForce Icon iDo Portable Headphone Amplifier & USB DAC - Blue at 13633.00 PHP from TREOO.com
NuForce Icon iDo Portable Headphone Amplifier & USB DAC - Blue
₱ 13,633.00
NuForce Icon iDo is an Audiophile-Grade DAC and Headphone Amp for iPad®; iPhone® and iPod Touch®. iDo extracts audio data in its original digital form (in USB Host mode) from Apple mobile digital devices, delivering bit-perfect, low-jitter, audiophile-quality music file playback. The Icon iDo delivers audiophile-grade CD quality sound to digital music files stored on Apple® mobile digital devices. iDo is ideal for music enthusiasts and musicians alike who primarily listen to—and have their digital music libraries stored on—these devices. Apple products are becoming the hub of a person’s entire music and audio collection, so improving the audio quality produced by these devices is key. The Icon iDo delivers on that at very affordable price point. A fast and easy connection. Using the Icon iDo is simple. Users can connect any Apple mobile device to the Icon iDo with the Apple® approved and included 30-pin sync/charging cable, attach the power supply, and then plug the Icon iDo into a home stereo system using RCA cables or a single coaxial. Users can also plug in headphones directly into the Icon iDo for personal high quality sound playback in a manner the artist intended it to be heard. How iDo makes music stored on Apple devices sound even better? Apple uses its own audio codec, Apple Lossless Encoder (Ale), to compress and store music files on its devices in original CD quality without loss. However, even ALE files only sound as good as the default DAC (digital-to-analog converter) found within the mobile digital device. Icon iDo bypasses the built-in DAC and extracts the audio data stored on the device in its original digital form in USB Host Mode. It then converts the high-quality files for bit-perfect and low-jitter music playback. A portable power station for the ultimate headphone listening experience. Icon iDo also offers a built-in headphone amplifier capable of powering power-hungry headsets, giving users a total audio experience. By properly powering headphones, Icon iDo enhances the auditory performance of the headphones because optimal amperage is being delivered to them, allowing for greater audio clarity. *The maximum sample rate currently supported by Apple is 16-bit/44.1kHz or 24-bit/48kHz. **Icon iDo is designed to work with Apple iTune and iPod software. Other applications may not work (but we have not found any application that is incompatible with iDo).
Shop now at
Lazada
Aune B1 Individual Component-Made HiFi Class A Portable Headphone Amplifier Black at 11449.00 PHP from Lazada
Aune B1 Individual Component-Made HiFi Class A Portable Headphone Amplifier Black
₱ 11,549.00
Shop now at
Lazada
Aune X7s Class-A Balance Output Headphone Amplifier (Silver) at 13490.00 PHP from Lazada
-10%
Aune X7s Class-A Balance Output Headphone Amplifier (Silver)
₱ 13,490.00 ₱ 14,990.00
Shop now at
TREOO.com
 Chord Mojo Portable Headphone Amplifier & USB DAC at 35375.00 PHP from TREOO.com
Chord Mojo Portable Headphone Amplifier & USB DAC
₱ 35,375.00
Chord Electronics is proud to introduce Mojo, the ultimate DAC/Headphone Amplifier for your smartphone. Simply connect Mojo to your iPhone, Android phone, PC, or Mac, plug in your headphones and you can experience crystal clear audio the way you would hear it in the recording studio. Designed and built in England, Mojo brings studio quality sound to your pocket and is the ultimate, truly portable, DAC/Amp. Mojo is built upon the multi-award winning Hugo platform and will afford the listener with Hugo like performance for a fraction of the cost. Inside Mojo is a massively powerful headphone amplifier that will deliver crystal clear audio whether you use in-ear buds or large studio cans, it will even play almost any audio file that you can find, up to 768kHz 32bit, and quad DSD 256. Thanks to the latest Li-Po technology, Mojo is able to charge to full in only four hours and will give between eight to ten hours continuous use. You may think that good quality headphones are the be all and end all, but they are just the beginning. By using Mojo between your smartphone and headphones you can experience crystal clear audio the way you would hear it in the recording studio. Mojo - The Game Has Changed.
Shop now at
TREOO.com
 Alpha Design Labs X1 Portable Headphone Amplifier & USB DAC - Red at 23017.00 PHP from TREOO.com
Alpha Design Labs X1 Portable Headphone Amplifier & USB DAC - Red
₱ 23,017.00
The ADL X1 is a small, discrete, but highly specified DAC/headphone amp with inputs supporting iOS digital at up to 16/48 via Apple MFI certified USB Cable for iPod, iPhone, iPad devices. The X1 also runs 24/192 S/pdif with high-resolution files from PC via the PC’s USB output. There’s an analog line-level 4-pin 3.5mm input and a 4-pin 3.5mm output for headphones in the 12~600 ohm range. The 4-pin input supports 3.5mm Remote and Mic Earphones. The 3.5mm Toslink optical output delivers Spdif up to 24/192. There's also a convenient GND Trrs switch making it easy to change from one 4-pin set of 'phones to another.
Shop now at
TREOO.com
 Shozy Px-M1 Portable Headphone Amplifier - Silver at 14129.00 PHP from TREOO.com
Shozy Px-M1 Portable Headphone Amplifier - Silver
₱ 14,129.00
This stylish and sleek portable headphone amp will breathe new life into your audiophile setup while on the go.

Headphone Amplifiers Philippines

Amp up your Audio

Most mainstream headphones that are targeted towards the mainstream consumers come with many different sound qualities, and they often don’t require a lot of power to drive them. Just plug them into your computers or smartphones and you’ll be able to listen just fine. If you want to have some high-fidelity audio in your headphones however, they’re a whole different ballgame altogether.

High-end headphones are expensive, but they sound exceptionally good. While they delivery fantastic sound quality, expensive headphones tend to require a little bit more in terms of power; the typical computer and audio jacks on smartphones are usually not enough to power these headphones. That is where these headphone amplifiers come into play, giving these high-end headphones that much-required power boost.

The many different headphone amplifiers

Headphone amplifiers come in a variety of different shapes and sizes – as well as specifications and pricing. However, whenever people mention headphone amplifiers, it is commonly referring to portable amplifiers that can be taken around to be paired with digital audio players and smartphones. There are also desktop amplifiers that are made to power headphones at home, those are significantly larger and tend to require constant power supply rather than operate on a battery like most portable amplifiers do.

How to know if your headphones need an amplifier

There are several different ways to know if your headphones could do with the help of a headphone amplifier, and these are sometimes also conditional; some headphones may seem like they need an amp, but they don’t.

  • Your headphones sound quiet when plugged into your device, even at higher volumes.
  • Your headphones have a high impedance of 32 ohms or more.

Those two are the most common signs that your headphones could probably do with an amplifier. The issue with quiet headphones is more prevalent when it comes to mobile devices such as your music player or smartphone. The specifications of your headphone are also commonly listed on the back of the packaging where you will be able to see if it has a high impedance.

One thing to keep in mind that most in-ear headphones or earphones typically do not require the use of a headphone amplifier because they do not require much power. Most earphones are also optimized for use with mobile devices.

Great brands of headphone amplifiers in the Philippines

Like the headphones themselves, there are many different brands of headphone amplifiers, as well as different price points depending on the specifications and components in the amplifiers. Here are some great brands of headphone amplifiers:

Fiio

Fiio is a rather famous headphone amplifier brand – largely because of their excellent value. Most Fiio products aren’t expensive, but they deliver fantastic performance in comparison to the other brands out there.

AudioQuest

AudioQuest is famous for its DragonFly DAC/AMP that plugs directly into the USB ports of your computers. The DragonFly DAC/AMP gives your headphones the much needed power and also delivers cleaner and more detailed sound thanks to the built-in DAC.

Sony

Sony themselves are one of the pioneers of high-fidelity audio to mainstream consumers. They have a large line of music players as well as headphone amplifiers that may be a little on the expensive side of things, but deliver on all fronts.

Hey, we’d like to know what you think of us
Skip
Thanks!