Product Categories
Products
Coupons
Trends
Wishlist
Save Now!
Categories
×
×
Add your favourite products
with one click
You will receive an update when this wishlist feature is available
We will make it up to you.
We promise!
Men  >   >   > 
8 Products

Bench Shirts for Men

Go to Shop
Bench mark Men's Flame Resistant Button Front Shirt, Lightweight, HRC 1, Navy, 5XL
₱ 4,376.00
Galleon

The button front long sleeve shirt is worn to protect against arc flash and flash fire. Tailored features make this shirt look and feel more like a casual dress shirt and less like a uniform. Features include high-temp durable Melamine buttons, double needle top stitching, covered chest pockets with a pen holder and tailor constructed cuffs. Generous arm openings, back pleats and a contoured fit maximize the wearer’s comfort. Benchmark’s 5.5oz flame resistant twill is made from combed cotton ring spun yarns, which yields a durable and lightweight material. The fabric is flame resistant for the life of the garments, non-allergenic, skin safe and will not react with sweat. When simple care instructions are followed the shirt will shrink less than 4-1/2% and can be home washed or commercially laundered. Detailed care instructions are sewn into the main label. Clean garment if soiled with contaminants or flammable material. Any material influencing flammability must be completely washed off the garment. Home washing is the preferred method for cleaning your flame resistant garments because even the most vigorous home wash will keep your garment looking better than an industrial service. If using a commercial laundry notify them that they are washing a flame resistant garments with instructions on the label. Home washing instructions are simple and mostly require leaving out extra chemicals during the home laundering process. Use normal or cotton cycle washing machine settings with warm water or normal temperature setting (140 degrees Fahrenheit). Store bought laundry detergent (i.e.: Tide® or All®) should be used. Do not use bleach, hydrogen peroxide or oxygenating agents (i.e.: OxyClean®) whether separate or contained within the detergent. Do not use lye based, or home-made soaps. Do not use fabric softeners. Tumble dry low or medium heat, avoid over drying and pressing with open steam. Do not use starch. Avoid excessively hard water, use softening agents (Calgon®) or water softening systems.

Read more
Go to Shop
Bench mark Men's Flame Resistant Button Front Shirt, Lightweight, HRC 1, Beige, 4XL
₱ 5,160.00
Galleon

The button front long sleeve shirt is worn to protect against arc flash and flash fire. Tailored features make this shirt look and feel more like a casual dress shirt and less like a uniform. Features include high-temp durable Melamine buttons, double needle top stitching, covered chest pockets with a pen holder and tailor constructed cuffs. Generous arm openings, back pleats and a contoured fit maximize the wearer’s comfort. Benchmark’s 5.5oz flame resistant twill is made from combed cotton ring spun yarns, which yields a durable and lightweight material. The fabric is flame resistant for the life of the garments, non-allergenic, skin safe and will not react with sweat. When simple care instructions are followed the shirt will shrink less than 4-1/2% and can be home washed or commercially laundered. Detailed care instructions are sewn into the main label. Clean garment if soiled with contaminants or flammable material. Any material influencing flammability must be completely washed off the garment. Home washing is the preferred method for cleaning your flame resistant garments because even the most vigorous home wash will keep your garment looking better than an industrial service. If using a commercial laundry notify them that they are washing a flame resistant garments with instructions on the label. Home washing instructions are simple and mostly require leaving out extra chemicals during the home laundering process. Use normal or cotton cycle washing machine settings with warm water or normal temperature setting (140 degrees Fahrenheit). Store bought laundry detergent (i.e.: Tide® or All®) should be used. Do not use bleach, hydrogen peroxide or oxygenating agents (i.e.: OxyClean®) whether separate or contained within the detergent. Do not use lye based, or home-made soaps. Do not use fabric softeners. Tumble dry low or medium heat, avoid over drying and pressing with open steam. Do not use starch. Avoid excessively hard water, use softening agents (Calgon®) or water softening systems.

Read more
Go to Shop
Bench mark Men's Flame Resistant Henley Shirt, Chest Pocket, HRC 2, NFPA 2112, Medium, Beige
₱ 5,166.00
Galleon

This Benchmark 3115FR long-sleeved knit shirt has a three-button front placket, rib band collar, ribbed cuffs, and chest pocket. It is made of 6.2-oz. flame-resistant ring-spun knit fabric for protection against flame and arc flash and is 100% cotton. It has raglan sleeves for comfort and ease of movement and flatlock seams for no chaffing. This shirt is suitable for use in the oil and gas, electrical, chemical, and other industries and meets National Fire Protection Association (NFPA) 2112 certification for flash fire and is compliant with Hazard Risk Category (HRC) 2. It has an Arc Thermal Protective Value (ATPV) of 9 and is code compliant with Occupational Safety and Health Administration (OSHA) 1910, ASTM International 1506, and National Electrical Safety Code (NESC) 2012. Made in USA. Benchmark FR manufactures arc and flame-resistant clothing. The company, founded in 2002, is headquartered in Santa Ana, CA.

Read more
Go to Shop
Bench mark Men's Flame Resistant Button Front Shirt, Lightweight, HRC 1, Beige, 3XL
₱ 5,518.00
Galleon

The button front long sleeve shirt is worn to protect against arc flash and flash fire. Tailored features make this shirt look and feel more like a casual dress shirt and less like a uniform. Features include high-temp durable Melamine buttons, double needle top stitching, covered chest pockets with a pen holder and tailor constructed cuffs. Generous arm openings, back pleats and a contoured fit maximize the wearer’s comfort. Benchmark’s 5.5oz flame resistant twill is made from combed cotton ring spun yarns, which yields a durable and lightweight material. The fabric is flame resistant for the life of the garments, non-allergenic, skin safe and will not react with sweat. When simple care instructions are followed the shirt will shrink less than 4-1/2% and can be home washed or commercially laundered. Detailed care instructions are sewn into the main label. Clean garment if soiled with contaminants or flammable material. Any material influencing flammability must be completely washed off the garment. Home washing is the preferred method for cleaning your flame resistant garments because even the most vigorous home wash will keep your garment looking better than an industrial service. If using a commercial laundry notify them that they are washing a flame resistant garments with instructions on the label. Home washing instructions are simple and mostly require leaving out extra chemicals during the home laundering process. Use normal or cotton cycle washing machine settings with warm water or normal temperature setting (140 degrees Fahrenheit). Store bought laundry detergent (i.e.: Tide® or All®) should be used. Do not use bleach, hydrogen peroxide or oxygenating agents (i.e.: OxyClean®) whether separate or contained within the detergent. Do not use lye based, or home-made soaps. Do not use fabric softeners. Tumble dry low or medium heat, avoid over drying and pressing with open steam. Do not use starch. Avoid excessively hard water, use softening agents (Calgon®) or water softening systems.

Read more
Go to Shop
Bench mark FR 1028FRN-L Men's Flame Resistant Button Front Cotton Shirt, Dual Hazard, HRC 2, NFPA 2112, Navy, Large
₱ 5,959.00
Galleon

This Benchmark 1028FR shirt has a button-up front and collar. It is made of 6.8-oz. flame-resistant twill fabric for protection against flame and arc flash and is 100% cotton. The shirt has double-stitched seams for strength and two front pockets with button flaps. It has large arm and shoulder openings, a front pocket pen holder, and a slight shirt tail bottom. It has high-temperature Melamine closures for safety. This shirt meets National Fire Protection Association (NFPA) 2112 certification for flash fire and is compliant with Hazard Risk Category (HRC) 2, with an Arc Thermal Protective Value (ATPV) of 8.5. It is code compliant with Occupational Safety and Health Administration (OSHA) 1910, ASTM International 1506, and National Electrical Safety Code (NESC) 2012. Made in USA. Benchmark FR manufactures arc and flame-resistant clothing. The company, founded in 2002, is headquartered in Santa Ana, CA.

Read more
Go to Shop
Bench mark FR 1028FRLG-XLT Men's Flame Resistant Button Front Cotton Shirt, Dual Hazard, HRC 2, NFPA 2112, Light Gray, X-Large-Tall
₱ 7,200.00
Galleon

This Benchmark 1028FR shirt has a button-up front and collar. It is made of 6.8-oz. flame-resistant twill fabric for protection against flame and arc flash and is 100% cotton. The shirt has double-stitched seams for strength and two front pockets with button flaps. It has large arm and shoulder openings, a front pocket pen holder, and a slight shirt tail bottom. It has high-temperature Melamine closures for safety. This shirt meets National Fire Protection Association (NFPA) 2112 certification for flash fire and is compliant with Hazard Risk Category (HRC) 2, with an Arc Thermal Protective Value (ATPV) of 8.5. It is code compliant with Occupational Safety and Health Administration (OSHA) 1910, ASTM International 1506, and National Electrical Safety Code (NESC) 2012. Made in USA. Benchmark FR manufactures arc and flame-resistant clothing. The company, founded in 2002, is headquartered in Santa Ana, CA.

Read more
Go to Shop
Bench mark FR 1028FRN-4XL Men's Flame Resistant Button Front Cotton Shirt, Dual Hazard, HRC 2, NFPA 2112, Navy, 4X-Large
₱ 8,866.00
Galleon

This Benchmark 1028FR shirt has a button-up front and collar. It is made of 6.8-oz. flame-resistant twill fabric for protection against flame and arc flash and is 100% cotton. The shirt has double-stitched seams for strength and two front pockets with button flaps. It has large arm and shoulder openings, a front pocket pen holder, and a slight shirt tail bottom. It has high-temperature Melamine closures for safety. This shirt meets National Fire Protection Association (NFPA) 2112 certification for flash fire and is compliant with Hazard Risk Category (HRC) 2, with an Arc Thermal Protective Value (ATPV) of 8.5. It is code compliant with Occupational Safety and Health Administration (OSHA) 1910, ASTM International 1506, and National Electrical Safety Code (NESC) 2012. Made in USA. Benchmark FR manufactures arc and flame-resistant clothing. The company, founded in 2002, is headquartered in Santa Ana, CA.

Read more
Go to Shop
Bench mark FR 1028FRLG-4XL Men's Flame Resistant Button Front Cotton Shirt, Dual Hazard, HRC 2, NFPA 2112, Light Gray, 4X-Large
₱ 7,885.00
Galleon

This Benchmark 1028FR shirt has a button-up front and collar. It is made of 6.8-oz. flame-resistant twill fabric for protection against flame and arc flash and is 100% cotton. The shirt has double-stitched seams for strength and two front pockets with button flaps. It has large arm and shoulder openings, a front pocket pen holder, and a slight shirt tail bottom. It has high-temperature Melamine closures for safety. This shirt meets National Fire Protection Association (NFPA) 2112 certification for flash fire and is compliant with Hazard Risk Category (HRC) 2, with an Arc Thermal Protective Value (ATPV) of 8.5. It is code compliant with Occupational Safety and Health Administration (OSHA) 1910, ASTM International 1506, and National Electrical Safety Code (NESC) 2012. Made in USA. Benchmark FR manufactures arc and flame-resistant clothing. The company, founded in 2002, is headquartered in Santa Ana, CA.

Read more