Go to top
24 products found
Shop now at
Galleon
Spears Manufacturing Spears 867V-SR Series PVC Clamp-On Saddle with Viton O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 2 IPS OD x 1
Spears Manufacturing Spears 867V-SR Series PVC Clamp-On Saddle with Viton O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 2 IPS OD x 1" NPT Female"
₱ 2,400.00
This Spears schedule 80 PVC clamp-on saddle has a female NPT threaded outlet for connecting to pipes or fittings with male NPT threaded ends, and is suitable for adding a 90-degree branch to a pipe. The stainless steel reinforcement increases the life of the outlet, and the National Pipe Taper (NPT) threads create a tighter seal than straight threads. The saddle is made of gray PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than metal. It has a Viton (FKM, fluoroelastomer) seal for resistance to oils, fuels, chemicals, many solvents, weathering, and extreme temperatures, and is compatible with all types of pipe with an Iron Pipe Size (IPS) outside diameter (OD). The saddle has a maximum pressure rating of 235 pounds per square inch (psi) at up to 4" IPS, 200 psi at 6" IPS, and 150 psi at 8 to 12" IPS. It comes with zinc-plated steel hardware for secure mounting to a pipe. This PVC clamp-on saddle is suitable for adding a 90-degree branch to pipes for chemical processing, industrial plating, chilled water distribution, deionized water lines, and chemical drainage and wastewater treatment systems. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 466SE Series PVC Clamp-On Saddle with EPDM O-Ring, SS Bolt, Schedule 40, White, 3 IPS OD x 1-1/4
Spears Manufacturing Spears 466SE Series PVC Clamp-On Saddle with EPDM O-Ring, SS Bolt, Schedule 40, White, 3 IPS OD x 1-1/4" Socket"
₱ 2,633.00
This Spears clamp-on saddle pipe fitting, in white, with an EPDM O-ring seal and stainless steel bolts is made of schedule 40 PVC and has an IPS saddle fitting and a socket branch connection. This two-piece saddle pipe fitting clamps onto the pipe, and is secured with adhesive (not included) and bolts (included), to create a branch connection with one outlet. The Iron Pipe Size (IPS) saddle sits over a hole that has been drilled into the pipe to create the new outlet and the outlet is sealed with an EPDM (ethylene propylene diene monomer) O-ring. EPDM is resistant to weathering, ozone, ultraviolet (UV) light, electricity, oils, water, steam, and some solvents. The saddle clamp bolts are stainless steel for resistance to scaling and corrosion. The branch outlet has a female socket connection for sliding over the end of a male pipe or fitting, which provides a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of PVC (polyvinyl chloride) for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials. It has a maximum operating pressure rating of 235 pounds per square inch (psi) at 73 degrees F. This fitting complies with National Sanitation Foundation International (NSF)/American National Standards Institute (ANSI) 61 Annex G, NSF/ANSI 372, and conforms with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January 2014. This clamp-on saddle pipe fitting is suitable for use in cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 468E Series PVC Clamp-On Saddle with Double Outlet, with EPDM O-Ring, Zink Bolt, Schedule 40, White, 10 IPS OD x 4
Spears Manufacturing Spears 468E Series PVC Clamp-On Saddle with Double Outlet, with EPDM O-Ring, Zink Bolt, Schedule 40, White, 10 IPS OD x 4" Socket"
₱ 17,011.00
This Spears clamp-on double-outlet saddle pipe fitting, in white, with EPDM O-ring seals and zinc bolts is made of schedule 40 PVC and has an IPS saddle fitting and socket branch connections. This two-piece saddle pipe fitting clamps onto the pipe, and is secured with adhesive (not included) and bolts (included), to create a branch connection with two outlets. The Iron Pipe Size (IPS) saddle sits over two holes that have been drilled into the pipe to create the new outlets and each outlet is sealed with an EPDM (ethylene propylene diene monomer) O-ring. EPDM is resistant to weathering, ozone, ultraviolet (UV) light, electricity, oils, water, steam, and some solvents. The saddle clamp bolts are zinc-plated carbon steel for strength and resistance to corrosion. The branch outlets have female socket connections for sliding over the end of unthreaded male pipes or fittings and provide a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of PVC (polyvinyl chloride) for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials. It has a maximum operating pressure rating of 235 pounds per square inch (psi) at 73 degrees F. This fitting complies with National Sanitation Foundation International (NSF)/American National Standards Institute (ANSI) 61 Annex G, NSF/ANSI 372, and conforms with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January 2014. This clamp-on double-outlet saddle pipe fitting is suitable for use in cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 466E Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Schedule 40, White, 2 IPS OD x 1/2
Spears Manufacturing Spears 466E Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Schedule 40, White, 2 IPS OD x 1/2" Socket"
₱ 2,526.00
This Spears schedule 40 PVC clamp-on saddle has a socket outlet for connecting to male pipes or fittings, and is suitable for adding a 90-degree branch to a pipe. The saddle is made of white PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than metal. It has an EPDM (ethylene propylene diene monomer) seal for resistance to oil, water, and some solvents, and is compatible with all types of pipe with an Iron Pipe Size (IPS) outside diameter (OD). The saddle has a maximum pressure rating of 235 pounds per square inch (psi) at up to 4" IPS, 200 psi at 6" IPS, and 150 psi at 8 to 12" IPS. It comes with zinc-plated steel hardware for secure mounting to a pipe. This PVC clamp-on saddle is suitable for adding a 90-degree branch to pipes for cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 468S Series PVC Clamp-On Saddle with Double Outlet, with Buna O-Ring, SS Bolt, Schedule 40, White, 3 IPS OD x 3/4
Spears Manufacturing Spears 468S Series PVC Clamp-On Saddle with Double Outlet, with Buna O-Ring, SS Bolt, Schedule 40, White, 3 IPS OD x 3/4" Socket"
₱ 2,928.00
This Spears clamp-on double-outlet saddle pipe fitting, in white, with Buna-N O-ring seals and stainless steel bolts is made of schedule 40 PVC and has an IPS saddle fitting and socket branch connections. This two-piece saddle pipe fitting clamps onto the pipe, and is secured with adhesive (not included) and bolts (included), to create a branch connection with two outlets. The Iron Pipe Size (IPS) saddle sits over two holes that have been drilled into the pipe to create the new outlets and each outlet is sealed with a buna-nitrile (also called Buna-N) O-ring. Buna-nitrile has high tensile strength abrasion, tear, and compression set resistance and compatibility with a variety of fluids such as petroleum and hydrocarbons. The saddle clamp bolts are stainless steel for resistance to scaling and corrosion. The branch outlets have female socket connections for sliding over the end of unthreaded male pipes or fittings and provide a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of PVC (polyvinyl chloride) for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials. It has a maximum operating pressure rating of 235 pounds per square inch (psi) at 73 degrees F. This fitting complies with National Sanitation Foundation International (NSF)/American National Standards Institute (ANSI) 61 Annex G, NSF/ANSI 372, and conforms with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January 2014. This clamp-on double-outlet saddle pipe fitting is suitable for use in cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 468SE Series PVC Clamp-On Saddle with Double Outlet, with EPDM O-Ring, SS Bolt, Schedule 40, White, 2 IPS OD x 1
Spears Manufacturing Spears 468SE Series PVC Clamp-On Saddle with Double Outlet, with EPDM O-Ring, SS Bolt, Schedule 40, White, 2 IPS OD x 1" Socket"
₱ 2,328.00
This Spears clamp-on double-outlet saddle pipe fitting, in white, with EPDM O-ring seals and stainless steel bolts is made of schedule 40 PVC and has an IPS saddle fitting and socket branch connections. This two-piece saddle pipe fitting clamps onto the pipe, and is secured with adhesive (not included) and bolts (included), to create a branch connection with two outlets. The Iron Pipe Size (IPS) saddle sits over two holes that have been drilled into the pipe to create the new outlets and each outlet is sealed with an EPDM (ethylene propylene diene monomer) O-ring. EPDM is resistant to weathering, ozone, ultraviolet (UV) light, electricity, oils, water, steam, and some solvents. The saddle clamp bolts are stainless steel for resistance to scaling and corrosion. The branch outlets have female socket connections for sliding over the end of unthreaded male pipes or fittings, which provide a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of PVC (polyvinyl chloride) for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials. It has a maximum operating pressure rating of 235 pounds per square inch (psi) at 73 degrees F. This fitting complies with National Sanitation Foundation International (NSF)/American National Standards Institute (ANSI) 61 Annex G, NSF/ANSI 372, and conforms with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January 2014. This clamp-on double-outlet saddle pipe fitting is suitable for use in cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 867V-CSR Series CPVC Clamp-On Saddle with Viton O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 3 IPS OD x 3/4
Spears Manufacturing Spears 867V-CSR Series CPVC Clamp-On Saddle with Viton O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 3 IPS OD x 3/4" NPT Female"
₱ 8,083.00
This Spears CPVC clamp-on saddle has a female NPT threaded outlet for connecting to pipes or fittings with male NPT threaded ends, and is suitable for adding a 90-degree branch to a pipe. The stainless steel reinforcement increases the life of the outlet, and the National Pipe Taper (NPT) threads create a tighter seal than straight threads. The saddle is made of medium gray CPVC (chlorinated polyvinyl chloride) for chemical and corrosion resistance, high strength, and better resistance to high temperatures and pressures than PVC (polyvinyl chloride). It has a Viton (FKM, fluoroelastomer) seal for resistance to oils, fuels, chemicals, many solvents, weathering, and extreme temperatures, and is compatible with all types of pipe with an Iron Pipe Size (IPS) outside diameter (OD). The saddle has a maximum pressure rating of 235 pounds per square inch (psi) at up to 4" IPS, 200 psi at 6" IPS, and 150 psi at 8 to 12" IPS. It comes with zinc-plated steel hardware for secure mounting to a pipe. This CPVC clamp-on saddle is suitable for adding a 90-degree branch to pipes for hot and cold water pressure distribution systems in residential and commercial applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears PVC Gate Valve, Non-Rising Stem, Buna-N O-Ring, 1 NPT Female
Spears Manufacturing Spears PVC Gate Valve, Non-Rising Stem, Buna-N O-Ring, 1 NPT Female"
₱ 3,559.00
Spears PVC Gate Valve, Non-Rising Stem, Buna-N O-Ring, 1" NPT Female
Shop now at
Galleon
Spears Manufacturing Spears 467S-SR Series PVC Clamp-On Saddle with Buna O-Ring, SS Bolt, Stainless Steel Reinforced Outlet, Schedule 40, White, 3 IPS OD x 2
Spears Manufacturing Spears 467S-SR Series PVC Clamp-On Saddle with Buna O-Ring, SS Bolt, Stainless Steel Reinforced Outlet, Schedule 40, White, 3 IPS OD x 2" NPT Female"
₱ 2,790.00
This Spears clamp-on saddle pipe fitting, in white, with a Buna-N O-ring seal, stainless steel bolts and reinforced outlet, is made of schedule 40 PVC and has an IPS saddle fitting and a female NPT branch connection. This two-piece saddle pipe fitting clamps onto the pipe, and is secured with adhesive (not included) and bolts (included), to create a branch connection with one outlet. The Iron Pipe Size (IPS) saddle sits over a hole that has been drilled into the pipe to create the new outlet, and the outlet is sealed with a buna-nitrile (also called Buna-N) O-ring. Buna-nitrile has high tensile strength abrasion, tear, and compression set resistance and compatibility with a variety of fluids such as petroleum and hydrocarbons. The saddle clamp bolts are stainless steel for resistance to scaling and corrosion. The branch outlet has stainless-steel–reinforced female National Pipe Taper (NPT) threads for connecting to male threaded pipes or fittings. The NPT threads create a tighter seal than straight threads. This schedule 40 (standard wall) fitting is made of PVC (polyvinyl chloride) for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials. It has a maximum operating pressure rating of 235 pounds per square inch (psi) at 73 degrees F. This fitting complies with National Sanitation Foundation International (NSF)/American National Standards Institute (ANSI) 61 Annex G, NSF/ANSI 372, and conforms with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January 2014. This clamp-on saddle pipe fitting is suitable for use in cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 466E Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Schedule 40, White, 3 IPS OD x 1-1/2
Spears Manufacturing Spears 466E Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Schedule 40, White, 3 IPS OD x 1-1/2" Socket"
₱ 2,580.00
This Spears schedule 40 PVC clamp-on saddle has a socket outlet for connecting to male pipes or fittings, and is suitable for adding a 90-degree branch to a pipe. The saddle is made of white PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than metal. It has an EPDM (ethylene propylene diene monomer) seal for resistance to oil, water, and some solvents, and is compatible with all types of pipe with an Iron Pipe Size (IPS) outside diameter (OD). The saddle has a maximum pressure rating of 235 pounds per square inch (psi) at up to 4" IPS, 200 psi at 6" IPS, and 150 psi at 8 to 12" IPS. It comes with zinc-plated steel hardware for secure mounting to a pipe. This PVC clamp-on saddle is suitable for adding a 90-degree branch to pipes for cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 867-SR Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 2 IPS OD x 1/2
Spears Manufacturing Spears 867-SR Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 2 IPS OD x 1/2" NPT Female"
₱ 2,289.00
This Spears 867-SR series schedule 80 PVC clamp-on saddle has a reinforced female NPT threaded outlet for connecting to pipes or fittings with male NPT threaded ends, and is suitable for adding a 90-degree branch to a pipe. The stainless steel reinforcement increases the life of the outlet, and the National Pipe Taper (NPT) threads create a tighter seal than straight threads. The saddle is made of gray PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than metal. It has an EPDM (ethylene propylene diene monomer) seal for resistance to oil, water, and some solvents, and is compatible with all types of pipe with an Iron Pipe Size (IPS) outside diameter (OD). The saddle has a maximum pressure rating of 235 pounds per square inch (psi) at up to 4" IPS, 200 psi at 6" IPS, and 150 psi at 8 to 12" IPS. It comes with zinc-plated steel hardware for secure mounting to a pipe. This PVC clamp-on saddle is suitable for adding a 90-degree branch to pipes for chemical processing, industrial plating, chilled water distribution, deionized water lines, and chemical drainage and wastewater treatment systems. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001. What's in the Box? PVC clamp-on saddle Hardware
Shop now at
Galleon
Spears Manufacturing Spears 467-SR Series PVC Clamp-On Saddle with Buna O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 40, White, 3 IPS OD x 1-1/2
Spears Manufacturing Spears 467-SR Series PVC Clamp-On Saddle with Buna O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 40, White, 3 IPS OD x 1-1/2" NPT Female"
₱ 1,840.00
This Spears clamp-on saddle pipe fitting, in white, with a Buna-N O-ring seal, zinc bolts, and stainless-steel–reinforced outlet is made of schedule 40 PVC and has an IPS saddle fitting and a female NPT branch connection. This two-piece saddle pipe fitting clamps onto the pipe, and is secured with adhesive (not included) and bolts (included), to create a branch connection with one outlet. The Iron Pipe Size (IPS) saddle sits over a hole that has been drilled into the pipe to create the new outlet, and the outlet is sealed with a buna-nitrile (also called Buna-N) O-ring. Buna-nitrile has high tensile strength abrasion, tear, and compression set resistance and compatibility with a variety of fluids such as petroleum and hydrocarbons. The saddle clamp bolts are zinc-plated carbon steel for strength and resistance to corrosion. The branch outlet has stainless-steel–reinforced female National Pipe Taper (NPT) threads for connecting to male threaded pipes or fittings. The NPT threads create a tighter seal than straight threads. This schedule 40 (standard wall) fitting is made of PVC (polyvinyl chloride) for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials. It has a maximum operating pressure rating of 235 pounds per square inch (psi) at 73 degrees F. This fitting complies with National Sanitation Foundation International (NSF)/American National Standards Institute (ANSI) 61 Annex G, NSF/ANSI 372, and conforms with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January 2014. This clamp-on saddle pipe fitting is suitable for use in cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 466 Series PVC Clamp-On Saddle with Buna O-Ring, Zink Bolt, Schedule 40, White, 4 IPS OD x 2-1/2
Spears Manufacturing Spears 466 Series PVC Clamp-On Saddle with Buna O-Ring, Zink Bolt, Schedule 40, White, 4 IPS OD x 2-1/2" Socket"
₱ 2,538.00
This Spears clamp-on saddle pipe fitting, in white, with a Buna-N O-ring seal and zinc plated bolts is made of schedule 40 PVC and has an IPS saddle fitting and a socket branch connection. This two-piece saddle pipe fitting clamps onto the pipe, and is secured with adhesive (not included) and bolts (included), to create a branch connection with one outlet. The Iron Pipe Size (IPS) saddle sits over a hole that has been drilled into the pipe to create the new outlet and the outlet is sealed with a buna-nitrile (also called Buna-N) O-ring. Buna-nitrile has high tensile strength abrasion, tear, and compression set resistance and compatibility with a variety of fluids such as petroleum and hydrocarbons. The saddle clamp bolts are zinc-plated carbon steel for strength and resistance to corrosion. The branch outlet has a female socket connection for sliding over the end of a male pipe or fitting, which provides a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of PVC (polyvinyl chloride) for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials. It has a maximum operating pressure rating of 235 pounds per square inch (psi) at 73 degrees F. This fitting complies with National Sanitation Foundation International (NSF)/American National Standards Institute (ANSI) 61 Annex G, NSF/ANSI 372, and conforms with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January 2014. This clamp-on saddle pipe fitting is suitable for use in cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 468S Series PVC Clamp-On Saddle with Double Outlet, with Buna O-Ring, SS Bolt, Schedule 40, White, 2 IPS OD x 1/2
Spears Manufacturing Spears 468S Series PVC Clamp-On Saddle with Double Outlet, with Buna O-Ring, SS Bolt, Schedule 40, White, 2 IPS OD x 1/2" Socket"
₱ 2,187.00
This Spears clamp-on double-outlet saddle pipe fitting, in white, with Buna-N O-ring seals and stainless steel bolts is made of schedule 40 PVC and has an IPS saddle fitting and socket branch connections. This two-piece saddle pipe fitting clamps onto the pipe, and is secured with adhesive (not included) and bolts (included), to create a branch connection with two outlets. The Iron Pipe Size (IPS) saddle sits over two holes that have been drilled into the pipe to create the new outlets and each outlet is sealed with a buna-nitrile (also called Buna-N) O-ring. Buna-nitrile has high tensile strength abrasion, tear, and compression set resistance and compatibility with a variety of fluids such as petroleum and hydrocarbons. The saddle clamp bolts are stainless steel for resistance to scaling and corrosion. The branch outlets have female socket connections for sliding over the end of unthreaded male pipes or fittings and provide a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of PVC (polyvinyl chloride) for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials. It has a maximum operating pressure rating of 235 pounds per square inch (psi) at 73 degrees F. This fitting complies with National Sanitation Foundation International (NSF)/American National Standards Institute (ANSI) 61 Annex G, NSF/ANSI 372, and conforms with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January 2014. This clamp-on double-outlet saddle pipe fitting is suitable for use in cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 867V-CSR Series CPVC Clamp-On Saddle with Viton O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 4 IPS OD x 3/4
Spears Manufacturing Spears 867V-CSR Series CPVC Clamp-On Saddle with Viton O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 4 IPS OD x 3/4" NPT Female"
₱ 9,907.00
This Spears CPVC clamp-on saddle has a female NPT threaded outlet for connecting to pipes or fittings with male NPT threaded ends, and is suitable for adding a 90-degree branch to a pipe. The stainless steel reinforcement increases the life of the outlet, and the National Pipe Taper (NPT) threads create a tighter seal than straight threads. The saddle is made of medium gray CPVC (chlorinated polyvinyl chloride) for chemical and corrosion resistance, high strength, and better resistance to high temperatures and pressures than PVC (polyvinyl chloride). It has a Viton (FKM, fluoroelastomer) seal for resistance to oils, fuels, chemicals, many solvents, weathering, and extreme temperatures, and is compatible with all types of pipe with an Iron Pipe Size (IPS) outside diameter (OD). The saddle has a maximum pressure rating of 235 pounds per square inch (psi) at up to 4" IPS, 200 psi at 6" IPS, and 150 psi at 8 to 12" IPS. It comes with zinc-plated steel hardware for secure mounting to a pipe. This CPVC clamp-on saddle is suitable for adding a 90-degree branch to pipes for hot and cold water pressure distribution systems in residential and commercial applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 467E-SR Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 40, White, 2 IPS OD x 1
Spears Manufacturing Spears 467E-SR Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 40, White, 2 IPS OD x 1" NPT Female"
₱ 2,111.00
This Spears schedule 40 PVC clamp-on saddle has a female NPT threaded outlet for connecting to pipes or fittings with male NPT threaded ends, and is suitable for adding a 90-degree branch to a pipe. The stainless steel reinforcement increases the life of the outlet, and the National Pipe Taper (NPT) threads create a tighter seal than straight threads. The saddle is made of white PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than metal. It has an EPDM (ethylene propylene diene monomer) seal for resistance to oil, water, and some solvents, and is compatible with all types of pipe with an Iron Pipe Size (IPS) outside diameter (OD). The saddle has a maximum pressure rating of 235 pounds per square inch (psi) at up to 4" IPS, 200 psi at 6" IPS, and 150 psi at 8 to 12" IPS. It comes with zinc-plated steel hardware for secure mounting to a pipe. This PVC clamp-on saddle is suitable for adding a 90-degree branch to pipes for cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 467E-SR Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 40, White, 2 IPS OD x 3/4
Spears Manufacturing Spears 467E-SR Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 40, White, 2 IPS OD x 3/4" NPT Female"
₱ 2,298.00
This Spears schedule 40 PVC clamp-on saddle has a female NPT threaded outlet for connecting to pipes or fittings with male NPT threaded ends, and is suitable for adding a 90-degree branch to a pipe. The stainless steel reinforcement increases the life of the outlet, and the National Pipe Taper (NPT) threads create a tighter seal than straight threads. The saddle is made of white PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than metal. It has an EPDM (ethylene propylene diene monomer) seal for resistance to oil, water, and some solvents, and is compatible with all types of pipe with an Iron Pipe Size (IPS) outside diameter (OD). The saddle has a maximum pressure rating of 235 pounds per square inch (psi) at up to 4" IPS, 200 psi at 6" IPS, and 150 psi at 8 to 12" IPS. It comes with zinc-plated steel hardware for secure mounting to a pipe. This PVC clamp-on saddle is suitable for adding a 90-degree branch to pipes for cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 867-SR Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 3 IPS OD x 1/2
Spears Manufacturing Spears 867-SR Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 3 IPS OD x 1/2" NPT Female"
₱ 4,202.00
This Spears 867-SR series schedule 80 PVC clamp-on saddle has a reinforced female NPT threaded outlet for connecting to pipes or fittings with male NPT threaded ends, and is suitable for adding a 90-degree branch to a pipe. The stainless steel reinforcement increases the life of the outlet, and the National Pipe Taper (NPT) threads create a tighter seal than straight threads. The saddle is made of gray PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than metal. It has an EPDM (ethylene propylene diene monomer) seal for resistance to oil, water, and some solvents, and is compatible with all types of pipe with an Iron Pipe Size (IPS) outside diameter (OD). The saddle has a maximum pressure rating of 235 pounds per square inch (psi) at up to 4" IPS, 200 psi at 6" IPS, and 150 psi at 8 to 12" IPS. It comes with zinc-plated steel hardware for secure mounting to a pipe. This PVC clamp-on saddle is suitable for adding a 90-degree branch to pipes for chemical processing, industrial plating, chilled water distribution, deionized water lines, and chemical drainage and wastewater treatment systems. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001. What's in the Box? PVC clamp-on saddle Hardware
Shop now at
Galleon
Spears Manufacturing Spears 867-SR Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 4 IPS OD x 2
Spears Manufacturing Spears 867-SR Series PVC Clamp-On Saddle with EPDM O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 4 IPS OD x 2" NPT Female"
₱ 4,188.00
This Spears 867-SR series schedule 80 PVC clamp-on saddle has a reinforced female NPT threaded outlet for connecting to pipes or fittings with male NPT threaded ends, and is suitable for adding a 90-degree branch to a pipe. The stainless steel reinforcement increases the life of the outlet, and the National Pipe Taper (NPT) threads create a tighter seal than straight threads. The saddle is made of gray PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than metal. It has an EPDM (ethylene propylene diene monomer) seal for resistance to oil, water, and some solvents, and is compatible with all types of pipe with an Iron Pipe Size (IPS) outside diameter (OD). The saddle has a maximum pressure rating of 235 pounds per square inch (psi) at up to 4" IPS, 200 psi at 6" IPS, and 150 psi at 8 to 12" IPS. It comes with zinc-plated steel hardware for secure mounting to a pipe. This PVC clamp-on saddle is suitable for adding a 90-degree branch to pipes for chemical processing, industrial plating, chilled water distribution, deionized water lines, and chemical drainage and wastewater treatment systems. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001. What's in the Box? PVC clamp-on saddle Hardware
Shop now at
Galleon
Spears Manufacturing Spears PVC Gate Valve, Non-Rising Stem, Viton O-Ring, 1 Socket
Spears Manufacturing Spears PVC Gate Valve, Non-Rising Stem, Viton O-Ring, 1 Socket"
₱ 3,478.00
Technical Specification Item Gate Valve Body Material - Valves PVC Connection Type Socket Pipe Size - Valves 1 Max. Water Pressure - CWP 200 psi Valve Max. Fluid Temp. 140 Degrees F Valve Stem Type Non-Rising Top of Handle to Inlet Center 4-5/16 Inlet to Outlet Length 3-5/16 Stem Material PVC Bonnet Style Screwed Wedge Material Polypropylene Seal Material Viton Handle Material Polypropylene Handle Type Hand Wheel This listing is for each.
Shop now at
Galleon
Spears Manufacturing Spears 867V-SR Series PVC Clamp-On Saddle with Viton O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 3 IPS OD x 2
Spears Manufacturing Spears 867V-SR Series PVC Clamp-On Saddle with Viton O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 3 IPS OD x 2" NPT Female"
₱ 3,384.00
This Spears schedule 80 PVC clamp-on saddle has a female NPT threaded outlet for connecting to pipes or fittings with male NPT threaded ends, and is suitable for adding a 90-degree branch to a pipe. The stainless steel reinforcement increases the life of the outlet, and the National Pipe Taper (NPT) threads create a tighter seal than straight threads. The saddle is made of gray PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than metal. It has a Viton (FKM, fluoroelastomer) seal for resistance to oils, fuels, chemicals, many solvents, weathering, and extreme temperatures, and is compatible with all types of pipe with an Iron Pipe Size (IPS) outside diameter (OD). The saddle has a maximum pressure rating of 235 pounds per square inch (psi) at up to 4" IPS, 200 psi at 6" IPS, and 150 psi at 8 to 12" IPS. It comes with zinc-plated steel hardware for secure mounting to a pipe. This PVC clamp-on saddle is suitable for adding a 90-degree branch to pipes for chemical processing, industrial plating, chilled water distribution, deionized water lines, and chemical drainage and wastewater treatment systems. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 468 Series PVC Clamp-On Saddle with Double Outlet, with Buna O-Ring, Zink Bolt, Schedule 40, White, 3 IPS OD x 1
Spears Manufacturing Spears 468 Series PVC Clamp-On Saddle with Double Outlet, with Buna O-Ring, Zink Bolt, Schedule 40, White, 3 IPS OD x 1" Socket"
₱ 1,899.00
This Spears clamp-on double-outlet saddle pipe fitting, in white, with Buna-N O-ring seals and zinc bolts is made of schedule 40 PVC and has an IPS saddle fitting and socket branch connections. This two-piece saddle pipe fitting clamps onto the pipe, and is secured with adhesive (not included) and bolts (included), to create a branch connection with two outlets. The Iron Pipe Size (IPS) saddle sits over two holes that have been drilled into the pipe to create the new outlets and each outlet is sealed with a buna-nitrile (also called Buna-N) O-ring. Buna-nitrile has high tensile strength abrasion, tear, and compression set resistance and compatibility with a variety of fluids such as petroleum and hydrocarbons. The saddle clamp bolts are zinc-plated carbon steel for strength and resistance to corrosion. The branch outlets have female socket connections for sliding over the end of unthreaded male pipes or fittings, which provide a smooth bore for enhanced flow. This schedule 40 (standard wall) fitting is made of PVC (polyvinyl chloride) for corrosion resistance, high strength, and less weight than fittings made from metal. It is compatible with schedule 40 PVC pipes and fittings. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. This fitting provides superior flow to metal because of its smooth interior finish, which reduces friction and inhibits buildup of materials. It has a maximum operating pressure rating of 235 pounds per square inch (psi) at 73 degrees F. This fitting complies with National Sanitation Foundation International (NSF)/American National Standards Institute (ANSI) 61 Annex G, NSF/ANSI 372, and conforms with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws and the U.S. Safe Drinking Water Act due to take effect January 2014. This clamp-on double-outlet saddle pipe fitting is suitable for use in cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 867V-CSR Series CPVC Clamp-On Saddle with Viton O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 4 IPS OD x 1
Spears Manufacturing Spears 867V-CSR Series CPVC Clamp-On Saddle with Viton O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 4 IPS OD x 1" NPT Female"
₱ 8,141.00
This Spears CPVC clamp-on saddle has a female NPT threaded outlet for connecting to pipes or fittings with male NPT threaded ends, and is suitable for adding a 90-degree branch to a pipe. The stainless steel reinforcement increases the life of the outlet, and the National Pipe Taper (NPT) threads create a tighter seal than straight threads. The saddle is made of medium gray CPVC (chlorinated polyvinyl chloride) for chemical and corrosion resistance, high strength, and better resistance to high temperatures and pressures than PVC (polyvinyl chloride). It has a Viton (FKM, fluoroelastomer) seal for resistance to oils, fuels, chemicals, many solvents, weathering, and extreme temperatures, and is compatible with all types of pipe with an Iron Pipe Size (IPS) outside diameter (OD). The saddle has a maximum pressure rating of 235 pounds per square inch (psi) at up to 4" IPS, 200 psi at 6" IPS, and 150 psi at 8 to 12" IPS. It comes with zinc-plated steel hardware for secure mounting to a pipe. This CPVC clamp-on saddle is suitable for adding a 90-degree branch to pipes for hot and cold water pressure distribution systems in residential and commercial applications. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.
Shop now at
Galleon
Spears Manufacturing Spears 497 Series PVC Pipe Fitting, Union with EPDM O-Ring, Schedule 40, 1 Socket
Spears Manufacturing Spears 497 Series PVC Pipe Fitting, Union with EPDM O-Ring, Schedule 40, 1 Socket"
₱ 341.00
This Spears schedule 40 PVC union fitting has socket openings on both ends, and is suitable for connecting two pipes. The socket ends connect to pipes with a smooth bore for enhanced flow. The fitting has three pieces and includes a threaded connection that can be screwed or unscrewed to connect or disconnect pipes more easily than with couplings. It is made of white PVC (polyvinyl chloride) for chemical and corrosion resistance, high strength, and less weight than fittings made from metal, and has an EPDM (ethylene propylene diene monomer) seal for resistance to oil, water, and some solvents. It is compatible with schedule 40 PVC pipes and fittings and is suitable for cold-water pressure distribution systems including irrigation, pool and spa, potable water, and chilled water applications. PVC can be connected to other materials such as steel, copper, or cast iron using transition fittings. The fitting has a maximum operating temperature of 140 degrees F, and a maximum pressure rating of 150 pounds per square inch (psi) at 73 degrees F. It meets ASTM International D1784 and D2466 standards for quality assurance, and is certified by National Sanitation Foundation International (NSF) for potable water service. This schedule 40 PVC union fitting is suitable for connecting pipes for conveying drinking water, waste water, chemicals, and other liquids in a range of industries. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. When purchasing pipe fittings, consider the application, as this will affect material type, shape, size and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness). Spears Manufacturing produces thermoplastic fittings and valves for fluid, drain, waste, and vent systems. The company, founded in 1969 and headquartered in Sylmar, CA, meets International Organization for Standardization (ISO) standard 9001.

Spears Manufacturing Jewellery Philippines

The best thing about Spears Manufacturing Jewellery is that you can get them in White! Spears 867V-SR Series PVC Clamp-On Saddle with Viton O-Ring, Zink Bolt, Stainless Steel Reinforced Outlet, Schedule 80, 2 IPS OD x 1" NPT Female", Spears 466SE Series PVC Clamp-On Saddle with EPDM O-Ring, SS Bolt, Schedule 40, White, 3 IPS OD x 1-1/4" Socket", Spears 468E Series PVC Clamp-On Saddle with Double Outlet, with EPDM O-Ring, Zink Bolt, Schedule 40, White and 10 IPS OD x 4" Socket" are popular Spears Manufacturing Jewellery which you can purchase online. Aside from Spears Manufacturing Jewellery, you can also check out other brands such as Yoursfs, Blue lans and SammyDress. At iprice, you can own an Spears Manufacturing Jewellery with a price range between ₱ 341.00 – ₱ 17,011.00. If you want, you can choose between a Rings.

Hey, we’d like to know what you think of us
Skip
Thanks!