Products
Coupons
Trends
Go to top
8 products found
Go to Shop
Yost Tools Yost Vises FSV-7" Heavy-Duty Forged Steel Bench Vise with 360-Degree Swivel Base
₱ 25,494.00
Galleon
The Yost Forged Steel Bench Vise is a Heavy duty Bench Vise. Constructed out of 75,000 PSI Forged Steel this Vise is meant for metal fabrication and other Heavy duty applications. The Vise features a 360 degree Swivel Base with two lock downs.
Read more
Go to Shop
Yost Tools Yost Vises 480 8" Heavy Duty Utility Combination Pipe and Bench Vise
₱ 31,628.00
Galleon
The Yost Vises Apprentice series utility combination pipe and bench vise has a 180-degree swivel base and mounts to a workbench to provide clamping action for light-duty applications. The 180-degree swivel base adjusts the direction of the jaws for proper placement. Hand-tightening the lock knob on the base secures its position. The vise has a cast iron body with steel U-channel bar for durability and has a flat portion that acts as an anvil and additional work surface. The hardened steel top jaws can be replaced when worn, and the built-in cast iron pipe jaws are grooved for enhanced grip. The top jaws can be replaced when worn. The jaws draw closer together or farther apart by turning the vise handle clockwise or counterclockwise
Read more
Go to Shop
Yost Tools Yost Vises 906-HV 6" High-Visibility Heavy Duty Steel Bench Vise
₱ 15,458.00
Galleon
The Yost Vises 906-HV 6" high-visibility all-steel utility combination pipe and bench vise with 360-degree swivel base mounts to a workbench to provide light-duty clamping action. The 360-degree swivel base adjusts the direction of the jaws for proper placement. Hand-tightening the two lock knobs on the base secures its position. The cast steel body has been painted with safety-yellow paint for visibility and has a flat portion that acts as a reinforced anvil and additional work surface. Both the top jaws and pipe jaws are grooved for enhanced grip. The top jaws are made of hardened steel and can be replaced when worn, and the pipe jaws are cast in place. The jaws draw closer together or farther apart by turning the vise handle clockwise or counterclockwise. The main screw that controls the jaws has been continuous rolled for high strength and is covered by a bar to protect it from damage. A rubber washer on either side of the handle prevents unwanted sliding when turning, and the balls on each end unscrew to enable replacement of the handle if worn. The base has three 0.56"-diameter holes for mounting hardware (not included). Specifications Jaw width (nominal) 6" Jaw opening (nominal) 6" Throat depth (nominal) 3" Pipe capacity 1/2" to 2" Overall dimensions* 6.5 x 7 x 16 in. (H x W x D) Weight 32 lb. *H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Vises use the clamping action of jaws to hold a workpiece in place for applications such as drilling and sawing. Vise styles are categorized by how the device is mounted. For example, bench vises mount to a benchtop; drill press vises bolt to a drill press; and woodworking vises fit underneath, on top, or to the side of a workbench. A vise's jaw opening and throat depth should be large enough for the workpiece. Yost Vises manufactures a wide range of vises, including bench-mount, woodworking, and drill-press styles. The company, founded in 1908, is headquartered in Holland, MI.
Read more
Go to Shop
Yost Tools Yost Vises 910-HV 10" High-Visibility Heavy Duty Steel Bench Vise
₱ 26,896.00
Galleon
The Yost Vises 910-HV 10" high-visibility all-steel utility combination pipe and bench vise with 360-degree swivel base mounts to a workbench to provide light-duty clamping action. The 360-degree swivel base adjusts the direction of the jaws for proper placement. Hand-tightening the two lock knobs on the base secures its position. The cast steel body has been painted with safety-yellow paint for visibility and has a flat portion that acts as a reinforced anvil and additional work surface. Both the top jaws and pipe jaws are grooved for enhanced grip. The top jaws are made of hardened steel and can be replaced when worn, and the pipe jaws are cast in place. The jaws draw closer together or farther apart by turning the vise handle clockwise or counterclockwise. The main screw that controls the jaws has been continuous rolled for high strength and is covered by a bar to protect it from damage. A rubber washer on either side of the handle prevents unwanted sliding when turning, and the balls on each end unscrew to enable replacement of the handle if worn. The base has three 0.625"-diameter holes for mounting hardware (not included). Specifications Jaw width (nominal) 10" Jaw opening (nominal) 10" Throat depth (nominal) 4" Pipe capacity 7/8" to 2-5/8" Overall dimensions* 8 x 10 x 21 in. (H x W x D) Weight 56 lb. *H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Vises use the clamping action of jaws to hold a workpiece in place for applications such as drilling and sawing. Vise styles are categorized by how the device is mounted. For example, bench vises mount to a benchtop; drill press vises bolt to a drill press; and woodworking vises fit underneath, on top, or to the side of a workbench. A vise's jaw opening and throat depth should be large enough for the workpiece. Yost Vises manufactures a wide range of vises, including bench-mount, woodworking, and drill-press styles. The company, founded in 1908, is headquartered in Holland, MI.
Read more
Go to Shop
Yost Tools Yost 10027 7WW-RA Woodworking Vise
₱ 16,911.00
Galleon
The Yost vises 7ww-ra 7 inch heavy-duty ductile iron woodworkers vise mounts flush Workbench 2-1/4 inch thick to provide clamping action for heavy-duty and professional applications. Assembled in the USA, the ductile iron Body construction provides strength for extended life. The slightly Tapered, also known as toed, jaws create a solid grip and apply pressure evenly across the top and bottom of the vise. The jaws draw closer together or farther apart by Turning the vise handle clockwise or counterclockwise. Solid steel guide rails adjust to counteract wear. The maximum opening guide bar equipped with end stop prevents vise separation. The adjustable-height steel lift Dog holds a workpiece in place for sanding or scraping and is supported by pressure clamps. A rubber Washer on either side of the handle prevents unwanted sliding when Turning, and the balls on each end unscrew to enable replacement of the handle if worn. The vise has two 1/4"- diameter holes and two 3/diameter holes for included mounting hardware.
Read more
Go to Shop
Yost Tools Yost HD CSV-4 Cross Slide Vise, 4"
₱ 6,980.00
Galleon
The Yost HD CSV-4 is a 4” Cross Slide Vise. Made from cast iron, this vise is designed for regular use on your drill press. The cross slide function of the vise allows you to quickly drill multiple holes in a product without re-clamping your project each time. Adjustable screws on the slides allow you to adjust the vise for optimal performance. Use this vise on your drill press for quickly drilling a series of pre-marked holes.
Read more
Go to Shop
Yost Tools Yost Vises SA-345 4-1/2" Aluminum Vise Jaw Caps (1 Pair)
₱ 2,326.00
Galleon
The Yost Vises SA-345 4-1/2" aluminum vise jaw caps attach to and cover a set of 4-1/2"-wide serrated vise jaws to shield delicate work from damage and meet Federal Specification GGG-C-00137B. The caps are made of aluminum for durability, and the polished finish creates a smooth surface to prevent the clamped item from being marred. Each cap has pliable tangs that fold over the serrated vise jaw to hold the cap in place. Two jaw caps are included. Yost Vises manufactures a wide range of vises, including bench-mount, woodworking, and drill-press styles. The company, founded in 1908, is headquartered in Holland, MI.
Read more
Go to Shop
Yost Tools Yost Vises 880-DI 8" Heavy Duty Reversible Bench Vise Made in USA
₱ 26,664.00
Galleon
The Yost Vises multi-purpose reversible combination pipe and bench vise has a 360-degree swivel base, mounts to a workbench to provide clamping action for medium-duty applications, and is made in USA. The reversible front jaw expands the jaw opening for larger applications. The 360-degree swivel base adjusts the direction of the jaws for proper placement. Hand-tightening the two lock knobs on the base secures its position. The ductile iron body provides strength for extended life and has two flat portions that act as an anvil and additional work surface. The hardened-steel top jaws can be reversed to display either the smooth side for delicate items or the serrated side for enhanced grip, and they can be replaced when worn. The hardened-steel pipe jaws are serrated for enhanced grip and can be replaced when worn. The jaws draw closer together or farther apart by turning the vise handle clockwise or counterclockwise. The main screw that controls the jaws has been continuous rolled for high strength and is covered by a bar to protect it from damage. A rubber washer on either side of the handle prevents unwanted sliding when turning, and the balls on each end unscrew to enable replacement of the handle if worn.
Read more
*Prices updated on 16 Oct 2017

Product Categories

Electronics

Fashion

Sports & Outdoors

Home & Living

Kids & Toys

Health & Beauty

Automotive

View All